fulltimin
Home is where we Park It.
Senior Member
Joined: 12/14/2003
View Profile
|
I am assume by this time, you know something else is coming. Lol.
You're right. A little modification is needed to make this a little more usable.
First, lets drill a hole in a piece of wood, that is roughly 1" x 1-1/2" and about 8 inches or so long.
![[image]](https://paddleupstream.com/mohorebuild/kregclampaddition.jpg)
If you want to do something, you will find a way.
If you don't, you will find an excuse.
-------------------------------------------------
Good judgement comes from experience.
A lot of experience, comes from bad judgement.
|
fulltimin
Home is where we Park It.
Senior Member
Joined: 12/14/2003
View Profile
|
Since I needed an extra clamp, I decided to use this one. Insert clamp into hole in wood.
It works like a champ.
With a piece of wood on each side, this clamp does it's job quite nicely. I can now use this instead of just leaving it on the bench waiting to be used.....
![[image]](https://paddleupstream.com/mohorebuild/kregclampaddition2.jpg)
|
fulltimin
Home is where we Park It.
Senior Member
Joined: 12/14/2003
View Profile
|
I am going to switch gears a little going forward. I am not done with the sink yet, but I'll move on to other things and every now and then post the progress on the sink.
(audience cheering, whistling, clapping, that we don't have to hear about that idiotic sink for a while). Ok, calm down, I'll come back to it eventually.
Wahoo!
|
LouLawrence
Traveling the US fulltime since 2000.
Senior Member
Joined: 03/16/2021
View Profile
|
![[image]](https://i.imgur.com/X8Y4q8kl.jpg )
![[image]](https://i.imgur.com/m3zZPvb.png) Click For Full-Size Image.
Just getting ready to click on the link. I will be sharing more details about how I managed that and whether clamps or saw horses were necessary in future posts.
|
fulltimin
Home is where we Park It.
Senior Member
Joined: 12/14/2003
View Profile
|
LouLawrence wrote:
Click For Full-Size Image.
Just getting ready to click on the link. I will be sharing more details about how I managed that and whether clamps or saw horses were necessary in future posts.
Ok. Sitting on the edge of my seat in anticipation.
|
|
|
fulltimin
Home is where we Park It.
Senior Member
Joined: 12/14/2003
View Profile
|
What does a block of wood, 2 clamps, a pole for a set of lamps, and a piece of plywood have in common?
![[image]](https://paddleupstream.com/mohorebuild/thirdhand.jpg)
![[image]](https://paddleupstream.com/mohorebuild/thirdhand2.jpg)
|
fulltimin
Home is where we Park It.
Senior Member
Joined: 12/14/2003
View Profile
|
In a matter of a minute or so, it becomes an extension for a counter that isn't long enough.....
![[image]](https://paddleupstream.com/mohorebuild/thirdhand3.jpg)
Or a nice platform to catch a piece of lumber that was just cut off with a circular saw.
![[image]](https://paddleupstream.com/mohorebuild/thirdhand4.jpg)
|
fulltimin
Home is where we Park It.
Senior Member
Joined: 12/14/2003
View Profile
|
Hope everyone is safe out there.
The remnants of Hurricane Ida came up though here yesterday. There has been some serious flooding in this general area.
We are ok, with no damage.
Hope your day is going well. ![[emoticon]](http://www.coastresorts.com/sharedcontent/cfb/images/smile.gif "smile")
|
fulltimin
Home is where we Park It.
Senior Member
Joined: 12/14/2003
View Profile
|
![[image]](https://paddleupstream.com/mohorebuild/mortiseandtenon.jpg)
|
fulltimin
Home is where we Park It.
Senior Member
Joined: 12/14/2003
View Profile
|
This was a test. This was only a test. Just curious to see if I got any comments on just a pic.
Evidently not. Lol. Hope you weekend is going well!
|
|
|
![[image]](https://i.imgur.com/X8Y4q8k.jpg )
