Open Roads Forum |
Print | Close |
Topic: Keystone Bullet Premier |
Posted By: garysol
on 06/21/11 09:46am
|
Thanks for the pics. Love the bunk bed ladder
2020 GMC Canyon 2022 NoBo 19.2 |
Posted By: CampinEarls
on 06/21/11 12:08pm
|
Habs97 wrote: ![]() Here are some of the mods I've done so far. Hope they can be usefull for some of you Bullet owners. Follow link below. Bullet Premier mods I'm assuming the little bracket on the bottom back of the fridge is what is keeping it in place...what exactly is that? I like that much more than the two straps that I have to hold it in place. 2009 Chevy Z71 CrewCab 2010 Bullet Premier 31BHPR |
Posted By: FensterRV
on 06/21/11 12:49pm
|
Habs97 wrote: ![]() Here are some of the mods I've done so far. Hope they can be usefull for some of you Bullet owners. Follow link below. Bullet Premier mods Great job on your mods. I especially like the paper holder towel holder placement outside,and a great spot for the tooth brushes, and loved the plastic shelvy things in the pantry. Could you tell me where you found that at ( pantry thing)? My wife and I were talking about doing something similar in there. I do suggest (and hope this isnt taken wrong) you shell out the $40 bucks and go with the traditional table pedestal mounts. Its really far more sturdy and looks so much nicer. ( I have the comfort pacakge too), and it won't looked as rigged with a board sitting underneath it lol. What type of bedroom lock did you go with? Great job. Virtual Garage has inspired alot of us. VG !!! Fenster 2011 Bullet Premier 31BHPR with comfort package Pro Pride Hitch w/ Prodigy P2. Steadyfast Stabilizers Pulled by "Big Daddy", aka 2000 Ford Excursion. |
Posted By: FensterRV
on 06/21/11 01:18pm
|
Hey since I'm not near my Bullet does anyone know off hand how many feet the bathroom and front doors are apart? I just bought a nice 8X20 awning matt and wondered where it would line up! I have a feeling I will get from the front door to right about where the outside kitchen sink starts.
|
Posted By: Habs97
on 06/21/11 01:26pm
|
CampinEarls wrote: ![]() Habs97 wrote: ![]() Here are some of the mods I've done so far. Hope they can be usefull for some of you Bullet owners. Follow link below. Bullet Premier mods I'm assuming the little bracket on the bottom back of the fridge is what is keeping it in place...what exactly is that? I like that much more than the two straps that I have to hold it in place. I bought those at our Local Walmart. I would imagine Walmarts in the US would carry the same or something similar. Look for those in the baby section Our 2011 model did not have a strap that came with it. Just those brackets at the back to hold the fridge in place, but nothing to prevent the door to open... Here's the link to the one I purchased: Multi Purpose Latch * This post was edited 06/21/11 01:56pm by Habs97 * 2011 Keystone Bullet Premier 31BHPR 2010 Toyota Sequoia Limited RV modifications ![]() |
Posted By: Habs97
on 06/21/11 01:46pm
|
FensterRV wrote: ![]() Habs97 wrote: ![]() Here are some of the mods I've done so far. Hope they can be usefull for some of you Bullet owners. Follow link below. Bullet Premier mods Great job on your mods. I especially like the paper holder towel holder placement outside,and a great spot for the tooth brushes, and loved the plastic shelvy things in the pantry. Could you tell me where you found that at ( pantry thing)? My wife and I were talking about doing something similar in there. I do suggest (and hope this isnt taken wrong) you shell out the $40 bucks and go with the traditional table pedestal mounts. Its really far more sturdy and looks so much nicer. ( I have the comfort pacakge too), and it won't looked as rigged with a board sitting underneath it lol. What type of bedroom lock did you go with? Great job. Virtual Garage has inspired alot of us. VG !!! Fenster I bought this shelving kit at Walmart (it's actually metal but the joints are in plastic). Cannot remember the brand, and couldn't find it in the website. I think both table setup have their pros and cons. I think I prefer my setup because the table can be moved around, and is much more stable once the 4 feets are stabalized. I've seen the pedestral mounted tables, and they can be quite shaky, but I agree that the leg room is much better with the pedestral table. And the board I put underneath the rug is not visible. You don't even notice it. For the bathroom lock, I purchased it also at Walmart. Here is the link. Although, I did have to increase the width of the lock hole because it was just a bit too small. Bathroom lock Yes, VG has inspired many of us with is numerous mods. I won't even list all of the mods I copied from him ![]() |
Posted By: Habs97
on 06/21/11 01:54pm
|
FensterRV wrote: ![]() Hey since I'm not near my Bullet does anyone know off hand how many feet the bathroom and front doors are apart? I just bought a nice 8X20 awning matt and wondered where it would line up! I have a feeling I will get from the front door to right about where the outside kitchen sink starts. I also have a 8x20 mat, and it does cover both doors, and maybe about a foot extra on both sides. |
Posted By: RainbowsEnd
on 06/21/11 02:22pm
|
White Wire Storage Cubes may be what you used. Do you now if the size works in other cabinets like the bedroom closets? Assembled cube measures 14.75"H x 14.75"L x 14.75"W There is another brand slightly smaller cube at twice the price: Safco Wire Cube Shelving System, 14w x 14d x 14h, Black F250 Diesel Lariat Laissez les bons temps rouler! |
Posted By: Habs97
on 06/21/11 05:21pm
|
Yes, it looks like the Whitmor cubes. We needed 3 of them for the pantry. With the remaining one, we tried it in the bedroom closet but it didn't fit.
|
Posted By: FensterRV
on 06/21/11 06:48pm
|
Thats great on the cubes. My wife will be pumped. My mod list, albiet a bit small now includes the Oxygenics shower head. The pressure from what I hear is a night and day difference between the stock shower head. Doing the quick install this weekend along with the bathroom door handle.
|
Print | Close |