Coast Resorts Open Roads Forum: Travel Trailers: Keystone Bullet Premier

Print | Close

Topic: Keystone Bullet Premier

Posted By: jcgib81 on 06/17/11 06:06am

Question: Right before my shakedown trip with my 2012 Premier I was washing it in the driveway. The back of the Trailer, the fiberglass skin I guess you would call it has about a 2 inch flex. The entire area is the same. Is everyones like this or is it delaminated? It looks fine but just weird to me. Thanks gang,
Jim G

2012 Keystone Premier 31BHPR (Blue Body Paint)
2011 GMC Yukon XL Denali Equalizer WD
DW,DS,DD

Posted By: garysol on 06/17/11 07:23am

jcgib81 wrote:

The entire area is the same. Is everyones like this or is it delaminated? It looks fine but just weird to me. Thanks gang,
Jim G

Its fine Jim. Totally normal. You will find most all trailers do this to some extent. The trailers structural frame work (studs, joists...etc...) run from side to side so there is little to no frame work in the middle of the rear of the trailer. I hope my rambling made sense [emoticon]

2020 GMC Canyon
2022 NoBo 19.2

Posted By: garysol on 06/19/11 06:06am

We had my inlaws with us this weekend and they wanted to sleep on the air mattress. It would have been the first time we had used it. Loved the quick setup but was not to happy with the fact that it lost all of it's air in about 1 hour [emoticon]

. . I checked the big air cap and it was tight. Is there another valve or vents that I am not aware of?

Posted By: jcgib81 on 06/19/11 09:17am

Gary,
Someone wrote on this forum a while ago that you had to inflate and deflate the air matress 3 times before using it to help all the seals . I have done it twice and it did seem like it leaked the first time, but the second was good for an hour after. Don't know if its true. If not get a kiddie pool, inflate that sucker and put it in and looks for leaks. Might work.

Posted By: garysol on 06/19/11 11:35am

I'll take the Matress home this weekend and inflate it a few times and see what happens.... Thanks

Posted By: garysol on 06/20/11 05:57am

No joy with the mattress. I inflated and deflated it a few times then inflated it again and let it sit over night and it was flat as a pancake this morning.......

On another note we did get to lay out "some" stone on our site this weekend. Here is the result of a full day with 10 tons of stone, a couple shovels and some landscape border....

[image]

Posted By: jcgib81 on 06/20/11 07:13am

Well the bright side is the camp site looks awesome. Sorry about the matress though. Makes me jealeous, going to Dutch Wonderland next week and Jellystone. Cant wait.

Posted By: FensterRV on 06/20/11 08:53am

The site looks fantastic. Thank you raising attention to the air mattress problem. Did you call your dealer for a new one yet?

2011 Bullet Premier 31BHPR with comfort package
Pro Pride Hitch w/ Prodigy P2.
Steadyfast Stabilizers
Pulled by "Big Daddy", aka 2000 Ford Excursion.

Posted By: garysol on 06/20/11 09:15am

FensterRV wrote:

The site looks fantastic. Thank you raising attention to the air mattress problem. Did you call your dealer for a new one yet?

My dealer is the best!!! Took him my bad mattress this morning and he took a new one out of a stock unit and sent me on my way with it. They said they have had many issues with our style mattress.

Posted By: Habs97 on 06/21/11 08:58am

Here are some of the mods I've done so far. Hope they can be usefull for some of you Bullet owners. Follow link below.

Bullet Premier mods

2011 Keystone Bullet Premier 31BHPR
2010 Toyota Sequoia Limited
RV modifications

Print | Close