tunabob
California
New Member
Joined: 09/05/2007
View Profile
Good Sam RV Club Member
 Offline
|
We received a RVi2 brake unit with the 2014 CRV we purchased. The CRV was pulled behind a class A using this unit. It is all pre wired I believe, but I need to change the plug on our class c from a 4 wire plug to possibly an 7 wire, the CRV has a 7 wire male plug at the front now. I have determined that there is a dedicated 12 volt and ground wire going from the battery to the 7 way plug. Any advice or drawings would be great? Thanks.
|
bobndot
USA
Senior Member
Joined: 08/21/2007
View Profile
Offline
|
If u call etrailer, a tech will run you thru it.
Also, many youtube videos as well.
https://www.etrailer.com/faq-wiring-7-way.aspx
|
CA Traveler
The Western States
Senior Member
Joined: 01/03/2004
View Profile
Offline
|
If you want the charge line then add it to the MH. It wasn't needed on our CRV.
Prewired does not mean it's compatible with your RV for the lights as sometimes some additional equipment is required, not a big deal.
2009 Holiday Rambler 42' Scepter with ISL 400 Cummins
750 Watts Solar Morningstar MPPT 60 Controller
2014 Grand Cherokee Overland
Bob
|
|
|
