longislandcamper
Long Island
Senior Member
Joined: 07/18/2011
View Profile
Offline
|
We always kept the TT in storage but now keep it in our side yard. We use the 30a to15a dogbone but we will be having the proper receptacle put in place so we don’t have to bother with extension cords and adapters anymore.
We currently have a 30a TT but will be upgrading to a larger one when the kids are out of daycare, but that’s still like 4 years away.
Our electrician is a camper so I’m confident in his work but I don’t want to bother him until we are ready for the work.
Let’s say we wanted to have a 30a and a 50a receptacle installed. We would use the 30 now and the 50 when we finally upgrade down the road. Would we need a dedicated 50a line AND a dedicated 30a line run to their respective receptacles by the camper? Or would we only need one dedicated 50a line and then they’d splice the line behind the receptacles to feed the 50a and the 30a receptacles? We wouldn’t be using the 50a and the 30a at the same time.
We do have a 50a to 30a dogbone just in case the 30a receptacle at the campground is down.
|
nickthehunter
Midwest
Senior Member
Joined: 07/18/2005
View Profile
Offline
|
All you need is the 50A line and the 50A and 30A receptacles can be run off that. I am not up on the code for that but it may require you to change the receptacles and breakers when you change to a 50A RV.
|
enblethen
Moses Lake, WA
Senior Member
Joined: 01/05/2005
View Profile
Offline
|
An RV electrical panel like this is best way to go. Wire from your main electrical panel with wire correctly sized for the distance. Number 6 would handle the load.
Bud
USAF Retired
Pace Arrow
2003 Chev Ice Road Tracker
|
ktmrfs
Portland, Oregon
Senior Member
Joined: 06/22/2005
View Profile
Offline
|
nickthehunter wrote:All you need is the 50A line and the 50A and 30A receptacles can be run off that. I am not up on the code for that but it may require you to change the receptacles and breakers when you change to a 50A RV.
TT 50A is a 240V/50A 4 wire circuit with two 120V/50A legs, two hot, one neutral one ground.
30A is a 30A/120V 3 wire one hot, one neutral, one ground.
If you plan to eventually go 50A, have the system wired to support both. A 50A/240V 4 wire from the main breaker box feeding the "trailer box". That box will be like what you see in campgrounds with one 50A/240V breaker and usually 2 120V breakers, a 30A feeding a 30A RV outlet a 20A/120V feeding a 20A duplex outlet and a 50A/240V breaker feeding the 50A outlet.
Note: The trailer will use the 50A 240V as TWO 120V/50A circuits, I don't know of any trailer that actually have any 240V appliances, although it would be possible to do.
Just make sure the don't wire the 30A as a 240V circuit!!!
https://www.homedepot.com/p/GE-RV-Panel-with-50-Amp-and-30-AMP-RV-Receptacles-and-a-20-Amp-GFCI-Receptacle-GE1LU532SS/203393689
Or just install a 50A circuit and use a 50-30 dogbone, Later if you decide you want a 30A outlet it can be added
Don't start with 30A, you'll basically redo everything going to 50A.
* This post was
edited 08/26/23 08:11pm by ktmrfs *
2011 Keystone Outback 295RE
2004 14' bikehauler with full living quarters
2015.5 Denali 4x4 CC/SB Duramax/Allison
2004.5 Silverado 4x4 CC/SB Duramax/Allison passed on to our Son!
|
pianotuna
Regina, SK, Canada
Senior Member
Joined: 12/18/2004
View Profile
Offline
|
Wire and install a 50 amp. Use a 50 to 30 dog bone.
Regards, Don
My ride is a 28 foot Class C, 256 watts solar, 556 amp-hours of Telcom jars, 3000 watt Magnum hybrid inverter, Sola Basic Autoformer, Microair Easy Start.
|
|
BB_TX
McKinney, Texas
Senior Member
Joined: 04/04/2005
View Profile
Offline
|
pianotuna wrote:Wire and install a 50 amp. Use a 50 to 30 dog bone.
^^^^^ THIS ^^^^^
Keep it simple.
|
time2roll
Southern California
Senior Member
Joined: 03/21/2005
View Profile
Good Sam RV Club Member
|
pianotuna wrote:Wire and install a 50 amp. Use a 50 to 30 dog bone. +1
Very few errors with a NEMA 14-50. The errors happen with the NEMA TT-30.
https://www.myrv.us/electric/. Click 30 or 50 top left for all the details.
2001 F150 SuperCrew
2006 Keystone Springdale 249FWBHLS
675w Solar pictures back up
|
JRscooby
Indepmo
Senior Member
Joined: 06/10/2019
View Profile
Offline
|
When I was running the outlet for Dads 30 Amp trailer, I buried wire needed to carry 50 Amp. On the post I wired 30 Amp outlet for camper, and on same leg, 20 Amp breaker, feeding duplex outlet. When changed to 50 Amp, just had to change plug, and breakers.
|
rhagfo
Portland, OR
Senior Member
Joined: 07/06/2012
View Profile
Good Sam RV Club Member
Offline
|
enblethen wrote:An RV electrical panel like this is best way to go. Wire from your main electrical panel with wire correctly sized for the distance. Number 6 would handle the load.
The breakers in that panel look to be Canadian, not US type.
Russ & Paula the Beagle Belle.
2016 Ram Laramie 3500 Aisin DRW 4X4 Long bed.
2005 Copper Canyon 293 FWSLS, 32' GVWR 12,360#
"Visit and Enjoy Oregon State Parks"
|
Bobbo
Wherever I park
Senior Member
Joined: 09/16/2007
View Profile
Good Sam RV Club Member
Offline
|
enblethen wrote:An RV electrical panel like this is best way to go. Wire from your main electrical panel with wire correctly sized for the distance. Number 6 would handle the load.
This ^^^^^^ was the route that I took, even though I have never owned a 50 amp RV. If I ever upgrade to a 50 amp RV, I have the power for it. I used 6 gauge wire (with 10 g for the ground), but I only had a 30 foot run, one way, for a total of 60 feet of wire.
Bobbo and Lin
2017 F-150 XLT 4x4 SuperCab w/Max Tow Package 3.5l EcoBoost V6
2017 Airstream Flying Cloud 23FB
|
|