Coast Resorts Open Roads Forum: Travel Trailers: Rain Gutter Modification
Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Posting Help and Support  |  Contact  

Search:   Advanced Search

Search only in Travel Trailers

Open Roads Forum  >  Travel Trailers  >  General Q&A

 > Rain Gutter Modification

Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 
Duane4238

North Tonawanda, New York

New Member

Joined: 07/28/2013

View Profile


Offline
Posted: 08/06/23 08:59am Link  |  Quote  |  Print  |  Notify Moderator

My travel trailer is a 2013 Keystone Springdale 311RE. It stays at my 50
acre camp all year. The gutters fill up with pine needles in a matter of days and it's a real pain in the a**. I cleaned out the Driver Side gutter yesterday and while up there I got to thinking. If the gutter fills and overflows, it's not doing its job. That side of the trailer is always dirty and I wash it every month but that doesn't really matter to me. I am thinking of putting something like a poly rope in the gutter (interference fit). That way rain water can drain into it, but the pine needles will fall or blow off because there will be nowhere for them to get caught. What do you think? Any other ideas or suggestions are welcomed. I'm now 72 years old and the wife doesn't like me on a ladder cleaning gutters. Thanks and enjoy every day in your TT.
Duane

Grit dog

Black Diamond, WA

Senior Member

Joined: 05/06/2013

View Profile


Offline
Posted: 08/06/23 09:29am Link  |  Quote  |  Print  |  Notify Moderator

Honestly, there’s not enough volume in the gutter to accommodate that. Imo.
I don’t think there’s an actual solution save for removing the source of the pine needles or a roof over it.
Consider making a little J hook somethin or other on a pole that you can just walk down each side and sweep out the gutters? Or maybe an air tool of similar fashion to blow the needles out. Everyone can use an air compressor if you don’t already have one.
Bigger issue. If the gutters are filling up that quick, the roof is covered with them 24-7.


2016 Ram 2500, MotorOps.ca EFIlive tuned, 5” turbo back, 6" lift on 37s
2017 Heartland Torque T29 - Sold.
Couple of Arctic Fox TCs - Sold

CA Traveler

The Western States

Senior Member

Joined: 01/03/2004

View Profile


Offline
Posted: 08/06/23 09:51am Link  |  Quote  |  Print  |  Notify Moderator

Add common household gutter guards Amazon etc cut down to fit your RV gutters.


2009 Holiday Rambler 42' Scepter with ISL 400 Cummins
750 Watts Solar Morningstar MPPT 60 Controller
2014 Grand Cherokee Overland

Bob


Boomerweps

Hills of PA

Senior Member

Joined: 04/30/2018

View Profile


Offline
Posted: 08/07/23 11:53am Link  |  Quote  |  Print  |  Notify Moderator

If it was my trailer, as a stationary camp, I’d build or have built a shed roof over it. In PA where I am, I’d hire the Mennonites/Amish.
If you have a lot of pine needles on it, sooner or later, you’ll have a pine branch on or through the roof. Pine needles tend to fall near straight down. So do the branches.


2019 Wolf Pup 16 BHS Limited, axle flipped
2019 F150 4x4 SCrew SB STX 5.0 3.55 factory tow package, 7000#GVWR, 1990 CC Tow mirrors, ITBC, SumoSprings,


TurnThePage

North ID

Senior Member

Joined: 10/08/2003

View Profile


Offline
Posted: 08/07/23 03:24pm Link  |  Quote  |  Print  |  Notify Moderator

I was able to replace the gutter molding that protects the screws that secure the gutter can to the trailer/RV with a rubber/vinyl product that extended out about 2" beyond the exterior wall as a kind of eve. It worked well, but I think the company went out of business. Maybe there's a similar product out there. Or you could fashion your own gutter or eve. Eternabond tape will secure almost anything.


2015 Ram 1500
2022 Grand Design Imagine XLS 22RBE

Grit dog

Black Diamond, WA

Senior Member

Joined: 05/06/2013

View Profile


Offline
Posted: 08/07/23 10:45pm Link  |  Quote  |  Print  |  Notify Moderator

TurnThePage wrote:

I was able to replace the gutter molding that protects the screws that secure the gutter can to the trailer/RV with a rubber/vinyl product that extended out about 2" beyond the exterior wall as a kind of eve. It worked well, but I think the company went out of business. Maybe there's a similar product out there. Or you could fashion your own gutter or eve. Eternabond tape will secure almost anything.


To that point, just stick some tin flashing to the roof and make a wider ad hoc eve.
But it won’t solve the bigger problem of a roof full of wet rotting pine needles.
Go figure…can’t park a rv under a bunch of trees for a long period of time without some regular maintenance or suffering the consequences. Who’d a thunk it.

If the OP can’t get on the roof to clean the gutters, any gutter solution is a moot point.
There’s other temporary or permanent solutions but they all require money or ability. No free lunch.

Duane4238

North Tonawanda, New York

New Member

Joined: 07/28/2013

View Profile


Offline
Posted: 11/16/23 11:01am Link  |  Quote  |  Print  |  Notify Moderator

Problem solved. I've never had a problem with pine needles piling up on the roof as the wind always blows them off. I ended up using 1/2" foam backer rod. It squeezes into the gutter and leaves no room for the needles to accumulate. They just blow off, too. And there's no problem when it rains, as the water just flows off the roof and down. Thanks to all for the advice and kind words.
Duane

Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 

Open Roads Forum  >  Travel Trailers  >  General Q&A

 > Rain Gutter Modification
Search:   Advanced Search

Search only in Travel Trailers


New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:




© 2026 CWI, Inc. © 2026 Good Sam Enterprises, LLC. All Rights Reserved.