Nlahni
Cincinnati
New Member
Joined: 07/23/2023
View Profile
 Offline
|
I am looking to see if anyone has ever had to remove their microwave and how you went about it. Just got back from a trip and microwave had dropped down about 2 inches. Looks like the top bracket came loose. Trying to find out how you get to the top fastners? Any help would be greatly appreciated. 2011 fleetweed Discovery 40X.
Thanks, Nick
|
pianotuna
Regina, SK, Canada
Senior Member
Joined: 12/18/2004
View Profile
Offline
|
Hi Nick,
Welcome to the forums.
Mine did drop in one corner--but not nearly 2 inches.
I removed the screws and slide the unit out.
Then I drove the shelf up into place after putting glue in place.
Finally I added some screws to reinforce the shelf.
I waited 24 hours, then reassembled the unit.
Regards, Don
My ride is a 28 foot Class C, 256 watts solar, 556 amp-hours of Telcom jars, 3000 watt Magnum hybrid inverter, Sola Basic Autoformer, Microair Easy Start.
|
msmith1.wa
Tacoma, WA
Senior Member
Joined: 05/10/2014
View Profile
Offline
|
I removed one from a previous trailer. It had an angled piece on the top and bottom that was screwed to the face of the cabinet. Sounds like yours is different.
2003 Silverado 2500HD 4x4 8.1l
2016 Evergreen Amped 28FS
|
Boomerweps
Hills of PA
Senior Member
Joined: 04/30/2018
View Profile
Offline
|
Just pulled mine to change out the single outlet to duplex.
Mine is mounted by a faceplate that uses four screws into the cabinet face. The plate is mounted to the microwave with two screws per side. The cord is just long enough to plug it in while the microwave is set on the counter.
2019 Wolf Pup 16 BHS Limited, axle flipped
2019 F150 4x4 SCrew SB STX 5.0 3.55 factory tow package, 7000#GVWR, 1990 CC Tow mirrors, ITBC, SumoSprings,
|
|
|
