Coast Resorts Open Roads Forum: Travel Trailers: Removing cabinets
Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Posting Help and Support  |  Contact  

Search:   Advanced Search

Search only in Travel Trailers


Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 
LynnEvans

Colorado

New Member

Joined: 07/22/2023

View Profile


Offline
Posted: 07/22/23 11:06pm Link  |  Quote  |  Print  |  Notify Moderator

My apologies if I missed a previous thread on this topic. We recently bought a 1994 Sunrise by Cobra (16 ft) travel trailer. Removed the small overhead bunk in the front of the trailer and the cabinet above the dinette (didn't need/want either one). Now in hindsight, I'm wondering if either or both of these added to the structural integrity of the trailer. I haven't been able to find a whole lot of information on the topic of cabinetry and structural integrity. What I have found is opposing opinions. One site says the cabinets definitely add to the structure and the trailer may just come apart being towed down the road if you remove any of the cabinets. Is there any truth to this? The last thing I want to worry about is the camper exploding when towing it down the road at 60 mpg. Thank you.

Tyler0215

Iowa

Senior Member

Joined: 03/13/2013

View Profile


Offline
Posted: 07/23/23 06:03am Link  |  Quote  |  Print  |  Notify Moderator

Of course the cabinets and bunk add structural integrity to the TT.
Will it "explode" going down the road? Probably not. But it has been weakened.
OTOH you have removed weight from high inside the TT so that may be a good thing.

Boomerweps

Hills of PA

Senior Member

Joined: 04/30/2018

View Profile


Offline
Posted: 07/23/23 08:22am Link  |  Quote  |  Print  |  Notify Moderator

Does the item removed act as a brace between two surfaces, yes. Was that its primary or even secondary function, no.
Depends on how weakly the structure was designed if removing a cabinet or bunk support makes ANY difference.
A definite non-concern in all but exceptional cases.


2019 Wolf Pup 16 BHS Limited, axle flipped
2019 F150 4x4 SCrew SB STX 5.0 3.55 factory tow package, 7000#GVWR, 1990 CC Tow mirrors, ITBC, SumoSprings,


ssthrd

Vancouver Island

Senior Member

Joined: 03/23/2016

View Profile



Posted: 07/23/23 09:42am Link  |  Quote  |  Print  |  Notify Moderator

If you are that concerned about it, maybe gussets in unobtrusive locations would help both structurally and mentally.


2014 Keystone Laredo 292RL
2013 Palomino Maverick 2902
2018 GMC 3500HD, 4x4, 6.5' box, SRW, Denali, Duramax, Andersen
DeeBee, JayBee, and Jed the Black Lab

The hurrier I go the behinder I get. (Lewis Carroll)

klutchdust

Orange, California

Senior Member

Joined: 06/09/2004

View Profile



Posted: 07/23/23 10:04am Link  |  Quote  |  Print  |  Notify Moderator

I removed a small cabinet from my TT and it was no more than a 1x2 with plywood stapled to it. On many builds cabinets are installed over the existing walls. I doubt they offer much to the structural integrity of the trailer. As far as exploding, learn how to read the date codes on your tires, they explode and would cause significant damage to your rig.

LynnEvans

Colorado

New Member

Joined: 07/22/2023

View Profile


Offline
Posted: 07/23/23 01:21pm Link  |  Quote  |  Print  |  Notify Moderator

Thank you for your replies. The original intention was to to reduce weight by eliminating items we didn't think we'd need. We will probably put a shelf up where the bunk was and maybe a narrow cabinet replacement above the dinette. It won't be an exact replacement for either, but perhaps will add a little strength back. Regardless, I definitely feel better about it. Thanks again for your replies.

BarneyS

S.E. Lower Michigan

Moderator

Joined: 10/16/2000

View Profile



Posted: 07/24/23 08:05am Link  |  Quote  |  Print  |  Notify Moderator

Be careful about reducing weight in front of the axles (changing stock weight distribution).
Barney
Note: edited to fix misstatement.

* This post was edited 07/24/23 05:14pm by BarneyS *


2004 Sunnybrook Titan 30FKS TT
Hensley "Arrow" 1400# hitch (Sold)
Not towing now.
Former tow vehicles were 2016 Ram 2500 CTD, 2002 Ford F250, 7.3 PSD, 1997 Ram 2500 5.9 gas engine


opnspaces

San Diego Ca

Senior Member

Joined: 12/22/2004

View Profile


Offline
Posted: 07/24/23 09:15am Link  |  Quote  |  Print  |  Notify Moderator

Barney did you mean be careful about reducing weight in front of the axles? Reducing weight behind the axles would server to increase tongue weight which is typically desirable. Well desirable up to a point at least.


2001 Suburban 4x4. 6.0L, 4.10 3/4 ton
2005 Jayco Jay Flight 27BH
1986 Coleman Columbia Popup.

BarneyS

S.E. Lower Michigan

Moderator

Joined: 10/16/2000

View Profile



Posted: 07/24/23 05:12pm Link  |  Quote  |  Print  |  Notify Moderator

Yep, my bad. Thanks for bringing it to my attention and I have corrected the post.
Barney

Huntindog

Phoenix AZ

Senior Member

Joined: 04/08/2002

View Profile



Posted: 07/25/23 05:57am Link  |  Quote  |  Print  |  Notify Moderator

Large items and cabinents are usually installed before the walls. that way nothing is in the way.


Huntindog
100% boondocking
2021 Grand Design Momentum 398M
2 bathrooms, no waiting
104 gal grey, 104 black,158 fresh
FullBodyPaint, 3,8Kaxles, DiscBrakes
17.5LRH commercial tires
1860watts solar,800 AH Battleborn batterys
2020 Silverado HighCountry CC DA 4X4 DRW



Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 

Search:   Advanced Search

Search only in Travel Trailers


New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:




© 2024 CWI, Inc. © 2024 Good Sam Enterprises, LLC. All Rights Reserved.