j3ff9ack
Idaho/Montana
Full Member
Joined: 02/02/2008
View Profile
Offline
|
Not sure why the new drive isn't showing up, but you can add it to the "Send to..." menu.
https://www.pcmag.com/how-to/how-to-customize-the-send-to-menu-in-windows
2007 Jayco JayFlight 27.5 RKS
2014 RAM 3500 SRW CC CTD 68RFE
|
HTElectrical
Las Vegas
Senior Member
Joined: 02/09/2008
View Profile
Offline
|
I believe your problem is the "send to" function is for removable drives. Your H drive is connected by a SATA cable or it is a NVME drive, correct? To copy or move information to an internal drive (Sata or NVME) you have to pull up the drive in Explorer, or my computer etc....
Open the drive and then drag and drop, or cut and paste, or copy and paste the information.
2007 Duramax, Cognito 7"-9" Lift,
|
NamMedevac 70
Reno
Senior Member
Joined: 11/09/2020
View Profile
|
Just curious, do you really need an H partition. I have been heavy computing for 30 years and never needed different partitions on my internal or external drives. Thanks.
|
DD716TED
Washington State
Senior Member
Joined: 10/27/2003
View Profile
Good Sam RV Club Member
|
NamMedevac 70 wrote:Just curious, do you really need an H partition. I have been heavy computing for 30 years and never needed different partitions on my internal or external drives. Thanks.
The new drive installed is labeled "H' and has no partitions.. the external USB 1Gb hard drive has partitions.. but "H" is the entire drive label..
|
joebedford
Home for the summer.
Senior Member
Joined: 09/03/2003
View Profile
|
NamMedevac 70 wrote:Just curious, do you really need an H partition. I have been heavy computing for 30 years and never needed different partitions on my internal or external drives. Thanks. I put LINUX on a separate partition. I've installed various VMs in separate partitions. My F: drive used to be my C: drive until I replaced C: with an SSD.
Oh yes, I've been computing for 55 years noob
|
|
NamMedevac 70
Reno
Senior Member
Joined: 11/09/2020
View Profile
|
joebedford wrote:NamMedevac 70 wrote:Just curious, do you really need an H partition. I have been heavy computing for 30 years and never needed different partitions on my internal or external drives. Thanks. I put LINUX on a separate partition. I've installed various VMs in separate partitions. My F: drive used to be my C: drive until I replaced C: with an SSD.
Oh yes, I've been computing for 55 years noob
I see your ego is in overdrive old goat.
Retired financial accountant and commercial plus Army pilot.
https://www.facebook.com/CaptBillPerkinsUNRescuePilot/?pnref=lhc.recent
https://www.facebook.com/william.perkins.79274
* This post was
last
edited 03/28/23 07:36am by NamMedevac 70 *
View edit history
|
Fizz
Ottawa, Canada
Senior Member
Joined: 07/28/2003
View Profile
|
Didn't take long for this post to blow up.
Typical.
|
joebedford
Home for the summer.
Senior Member
Joined: 09/03/2003
View Profile
|
OK boomer.
|
Martyn
Panama City Beach, FL USA
Senior Member
Joined: 09/27/2004
View Profile
Good Sam RV Club Member
Offline
|
45 years computing here. Recently bought a new Dell Win 11 desktop. 500Gb SSD plus 2Tb factory installed SATA drive. Factory installed and labeled them as C: and H: drives. Now, if I open a file's properties on the C drive, and then select the 'more properties' line at the bottom, I get a 'send to' option among the next set of options. When I select that the H: drive comes up as an available option.
This doesn't answer the OPs question other than to say it should work. Must be an obscure setting somewhere that I, for one, have never come across!
2020 Keystone Cougar Half-Ton 27SGS;
2019 Dodge Ram 2500 QC 4x4 6.4 Hemi BigHorn;
DEMCO Autoslide; 2 Honda EU2000i's;
Our Website
|
opnspaces
San Diego Ca
Senior Member
Joined: 12/22/2004
View Profile
Offline
|
The above is what you are trying to do. But to me there are too many options to make it easy to follow. So try this.
On your computer you need a run command and not just the search box at the bottom of the screen. So
- Either press the and hold the windows key on your keyboard and then press the R and the run box will pop up. Alternatively you try right clicking on the little windows icon on the bottom left of the screen and then select RUN
- In the Run window type in shell : sendto and press enter. EDIT gotta love our software it keeps adding a smiley in the shell command so I had to add spaces to make it dispaly. That is supposed to be type shell then a colon then sendto with no spaces and no quotes
- the Send To window should open
- Click and drag that new send to window out of the way but leave it open
- Now use file explorer or whatever method you are used to and navigate your drives and find the H drive
- Right click on the H drive and select copy
- Now go back to the Send To window that you dragged out of the way
- In the Send To window pick an blank space and right click and select Paste Shortcut
- Wait a few seconds and the H drive will show up
- Close the Send To window
- Test
* This post was
edited 03/28/23 07:02pm by opnspaces *
2001 Suburban 4x4. 6.0L, 4.10 3/4 ton
2005 Jayco Jay Flight 27BH
1986 Coleman Columbia Popup.
|
|