mattyj
Long Island.New York
Senior Member
Joined: 07/04/2005
View Profile
 Offline
|
SoonDockin wrote:My camper came with two remotes. One wired and the other wireless. Is it possible you have a second remote? I only have one remote, I ordered one on eBay and the numbers in the photo in the ad matched my remote, but of course they sent the wrong one and now when I try to print the return label they sent me to return the wrong one I can’t get it to print ??????????
2006 Ford F 350, 6.0 PSD 8 Foot Bed 4x4 with Torklift Tie downs ,Stable Loads ,rear Helwig Swaybar,airlifts 5000 , Method 305 HD rims . 2019 Adventurer 89 RBS, slideout, Generator
|
3 tons
NV.
Senior Member
Joined: 03/13/2009
View Profile
Offline
|
I had that problem and when looking at the controller board discovered that in the lower right hand corner, a wire lug had come loose from the board…I reinserted it and all was well…
3 tons
|
mattyj
Long Island.New York
Senior Member
Joined: 07/04/2005
View Profile
Offline
|
3 tons wrote:I had that problem and when looking at the controller board discovered that in the lower right hand corner, a wire lug had come loose from the board…I reinserted it and all was well…
3 tons I’ll go try that right now, thanks
|
mattyj
Long Island.New York
Senior Member
Joined: 07/04/2005
View Profile
Offline
|
mattyj wrote:3 tons wrote:I had that problem and when looking at the controller ![[emoticon]](http://www.coastresorts.com/sharedcontent/cfb/images/confused.gif "confused") board discovered that in the lower right hand corner, a wire lug had come loose from the board…I reinserted it and all was well…
3 tons I’ll go try that right now, thanks that wire lug was tight. No luck
|
opnspaces
San Diego Ca
Senior Member
Joined: 12/22/2004
View Profile
Offline
|
What do you mean by the jacks behaved worse after you swapped the wires. Can you help someone like me visualize what is happening?
Originally as reported
All jacks work at once. That makes sense to me
The rear jacks work ok. Does that mean you can extend each rear jack individually or just extend them as a pair?
The Fronts don't work. Yep easy to understand.
You then tried swapping the wires and said it got worse. Can you describe what happened? Did you suddenly have no jacks? Did all the jacks except one rear stop working? If so which jack? Did a front jack ever try to work? If so which jack?
2001 Suburban 4x4. 6.0L, 4.10 3/4 ton
2005 Jayco Jay Flight 27BH
1986 Coleman Columbia Popup.
|
|
|
mattyj
Long Island.New York
Senior Member
Joined: 07/04/2005
View Profile
Offline
|
opnspaces wrote:What do you mean by the jacks behaved worse after you swapped the wires. Can you help someone like me visualize what is happening?
Originally as reported
All jacks work at once. That makes sense to me
The rear jacks work ok. Does that mean you can extend each rear jack individually or just extend them as a pair?
The Fronts
don't work. Yep easy to understand.
You then tried swapping the wires and said it got worse. Can you describe what happened? Did you suddenly have no jacks? Did all the jacks except one rear stop working? If so which jack? Did a front jack ever try to work? If so which jack? The All JACKS button Only the left rear goes opposite and Right rear goes opposite , the other jacks do not work at all. LEFT FRONT up button goes down and the left front down button nothing happens LEFT REAR down button goes up and the up button nothing moves RIGHT FRONT up and down buttons, nothing moves RIGHT REAR. up button does not work and down button goes up . I hope this isn’t too confusing.
|
mattyj
Long Island.New York
Senior Member
Joined: 07/04/2005
View Profile
Offline
|
I have all the wiring connected as per Happijac website
|
HMS Beagle
Napa, California
Senior Member
Joined: 08/22/2003
View Profile
|
Did the remote come with the controller board? It sounds to me like the encoding of the remote does not match the controller board. Different hardware revisions, different software revisions, or the like. If you bought them separately, I'd think you'd have to check with Happijac to see if they are compatible, probably need pn or serial numbers for each to tell.
Bigfoot 10.4E, 2015 F350 6.7L DRW 2WD, Autoflex Ultra Air Ride rear suspension, Hellwig Bigwig sway bars front and rear
|
opnspaces
San Diego Ca
Senior Member
Joined: 12/22/2004
View Profile
Offline
|
mattyj wrote:opnspaces wrote:What do you mean by the jacks behaved worse after you swapped the wires. Can you help someone like me visualize what is happening?
Originally as reported
All jacks work at once. That makes sense to me
The rear jacks work ok. Does that mean you can extend each rear jack individually or just extend them as a pair?
The Fronts
don't work. Yep easy to understand.
You then tried swapping the wires and said it got worse. Can you describe what happened? Did you suddenly have no jacks? Did all the jacks except one rear stop working? If so which jack? Did a front jack ever try to work? If so which jack?
The All JACKS button Only the left rear goes opposite and Right rear goes opposite , the other jacks do not work at all.
LEFT FRONT up button goes down and the left front down button nothing happens
LEFT REAR down button goes up and the up button nothing moves
RIGHT FRONT up and down buttons, nothing moves
RIGHT REAR. up button does not work and down button goes up .
I hope this isn’t too confusing.
Nope it's actually clear when I space it all out as above. But yes I can see why you said it's worse. Going back to your original post where you say ALL Jacks work at once really sounds like the jacks and the controller are all working and as you suspected the remote is faulty.
|
stevenal
Newport, OR, USA
Senior Member
Joined: 03/16/2004
View Profile
Offline
|
1 Up and down refer to the camper direction. It's easy to get this confused, since the jacks extend downward to move the camper up.
2 If the jacks move opposite to what's described above, you have a polarity issue.
3 When all else fails, I find a power cycle reboot will cure things.
'18 Bigfoot 1500
Torklifts and Fastguns
'17 F350 Powerstroke Supercab SRW LB 4X4
|
|
|
