Coast Resorts Open Roads Forum: Class C Motorhomes: Jayco J-ride
Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Posting Help and Support  |  Contact  

Search:   Advanced Search

Search only in Class C Motorhomes

Open Roads Forum  >  Class C Motorhomes  >  Class C

 > Jayco J-ride

Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 
Page of 2  
Prev
j-d

Sunny Florida USA

Senior Member

Joined: 09/04/2003

View Profile



Good Sam RV Club Member

Offline
Posted: 06/14/17 02:16pm Link  |  Quote  |  Print  |  Notify Moderator

Jayco site explains which series gets which parts of the total J-Ride package. It's also possible that smaller coaches within a series don't get the same as bigger ones. Seen that with helper springs, don't know if that still holds.

Looking at the 2018 brochure, every Jayco gets a balanced driveshaft.

Redhawk gets isolator mounts and helper springs.

Greyhawk gets isolator, helper, and finally adds shocks and sway bar.

Seneca's a Super C and the package is entirely different.

Just for me, the biggest thing about J-Ride is that a manufacturer is at least beginning to address Class C Handling.

* This post was last edited 06/14/17 02:41pm by j-d *   View edit history


If God's Your Co-Pilot Move Over, jd
2003 Jayco Escapade 31A on 2002 Ford E450 V10 4R100 218" WB

pauldub

North of Seattle

Senior Member

Joined: 11/01/2005

View Profile


Offline
Posted: 06/14/17 02:10pm Link  |  Quote  |  Print  |  Notify Moderator

Was he enthusiastic enough to explain what the specific suspension enhancements were? Looking on their website, it appears that it's Bilstein shocks and a Helwig rear helper springs. They seem to talk about sway bars but they don't say that they have upgraded them over what comes on the OEM Class C chassis. My Winnie has rubber isolators between the chassis and house, I suspect most do. Any stretched chassis is going to have an extended driveshaft and it will be balanced as part of the normal driveshaft building process. If the chassis isn't stretched, it will have the normal OEM driveshaft that was balanced at the factory.

I wouldn't chose a Jayco because of their J-Ride if I wasn't satisfied with the floorplan, weight carrying capacity, or build quality.

j-d

Sunny Florida USA

Senior Member

Joined: 09/04/2003

View Profile



Good Sam RV Club Member

Offline
Posted: 06/14/17 02:02pm Link  |  Quote  |  Print  |  Notify Moderator

J-Ride is several components. Some are easy to add, others difficult, some impossible.

1. Rear Sway Bar and/or Helper Springs, easily added at a cost of a few hundred

2. Bilstein Shocks, same as above
3. Computer balanced Drive Shaft. Can be done for a couple hundred or less, a rarely needed effort

4. Rubber isolators between Chassis and Body. Can't be added in practicality. I don't know how much they help. Our Jayco was built with them long before J-Ride was offered.

Items 1. and 2. can make significant improvements in a coach's ride, handling, and tracking. A heavy duty sway bar will actually stabilize a Class C on the campsite.

stargirl96

Weatherford, OK

Full Member

Joined: 06/09/2011

View Profile



Good Sam RV Club Member

Offline
Posted: 06/14/17 12:57pm Link  |  Quote  |  Print  |  Notify Moderator

We were looking at Jayco Greyhawk and Redhawk motorhomes. The salesman was enthusiastic about the J-ride suspension and stabilization system. Does anyone have experience with this suspension system, and is it superior to others? Thanks for your input.

Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 
Page of 2  
Prev

Open Roads Forum  >  Class C Motorhomes  >  Class C

 > Jayco J-ride
Search:   Advanced Search

Search only in Class C Motorhomes


New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:




© 2026 CWI, Inc. © 2026 Good Sam Enterprises, LLC. All Rights Reserved.