2017 Host mammoth, sold
49 states, 41 National Parks, 7 Provinces
2019 2 door Rubicon 6 spd.
2019 Berkshire XLT 45B
2022 Host Cascade
2021 Ram 5500 Air ride
'10 Ford F-450, 6.4, 4.30, 4x4, 14,500 GVWR, '06 Host Rainer 950 DS, Torklift Talon tiedowns, Glow Steps, and Fastguns. Bilstein 4600s, Firestone Bags, Toyo M655 Gs, Curt front hitch, Energy Suspension bump stops.
NRA Life Member, CCA Life Member
2015 Host Mammoth triple slide w/ TorkLift Fastguns
2015 Ram 5500 SLT cab & chassis with Douglass 9' utility body
zb39 wrote:
Truck came in at 60 inches cab to axle. The bed I arranged to buy won't work. trlying to find another. I'm supposed to leave the 3rd on a trip. Not good.
Truck came in at 60 inches cab to axle. The bed I arranged to buy won't work. trlying to find another. I'm supposed to leave the 3rd on a trip. Not good.
Unfortunate to hear.
zb39 wrote:
Truck came in at 60 inches cab to axle. The bed I arranged to buy won't work. trlying to find another. I'm supposed to leave the 3rd on a trip. Not good.
Truck came in at 60 inches cab to axle. The bed I arranged to buy won't work. trlying to find another. I'm supposed to leave the 3rd on a trip. Not good.
I see from this thread you initially ordered the 60" and changed it later with a call to the dealer. I assume the dealer dropped the ball? If so can they find you a comparable or better equipped truck already on a lot somewhere?
2022 Ram 3500 Laramie CTD DRW Crew 4x4 Aisin 4:10 Air ride.
2020 Grand Design Solitude 2930RL 2520 watts solar. 600ah lithium. Magnum 4000 watt inverter.
The edges would be 2x2" angle with some cross supports. A 3/4" piece of plywood with rubber mat would finish it off. This cradle would be bolted to the frame rails and some triangular shaped camper tie down points bolted off the frame could go to your turnbuckles.
* This post was edited 02/27/18 03:35pm by Bedlam *
Chevy Sonic 1.8-Honda Passport C70B-Host Mammoth 11.5-Interstate Car Carrier 20-Joyner SandViper 250-Kawasaki Concours ZG1000-Paros 8' flatbed-Pelican Decker DLX 8.75-Ram 5500 HD
Bedlam wrote:
Could you get a temporary tray fabricated for the base of the Host and some plastic wheel well covers so you can make your scheduled trip and deal with the details once you return?
The edges would be 2x2" angle with some cross supports. A 3/4" piece of plywood with rubber mat would finish it off. This cradle would be bolted to the frame rails and some triangular shaped camper tie down points bolted off the frame could go to your turnbuckles.
Could you get a temporary tray fabricated for the base of the Host and some plastic wheel well covers so you can make your scheduled trip and deal with the details once you return?
The edges would be 2x2" angle with some cross supports. A 3/4" piece of plywood with rubber mat would finish it off. This cradle would be bolted to the frame rails and some triangular shaped camper tie down points bolted off the frame could go to your turnbuckles.
This was a choice I had to make when I was faced with selling my 3500 and having only the C & C to deliver the camper to my truck bed outfitter. I actually passed on an offer to sell the GMC and kept both trucks for a couple months until it got closer to production. I had put a lot of thought into fabricating a temp. platform for an easier delivery but opted out. Man....to have a special ordered truck not right-that's not right.