jimh406
Western MT
Senior Member
Joined: 06/11/2006
View Profile
 Offline
|
Cool, I thought it might have a green tint to it. Does it automatically switch to the second tank? If not, is the 52 the primary and 22 is a reserve?
'10 Ford F-450, 6.4, 4.30, 4x4, 14,500 GVWR, '06 Host Rainer 950 DS, Torklift Talon tiedowns, Glow Steps, and Fastguns. Bilstein 4600s, Firestone Bags, Toyo M655 Gs, Curt front hitch, Energy Suspension bump stops.
NRA Life Member, CCA Life Member
|
zb39
slippery rock
Senior Member
Joined: 10/26/2009
View Profile
Offline
|
Engine pulls fuel from the 22 gal mid mount tank and as it goes down it is auto filled from the rear 52 gal tank. That is my understanding of it. I filled it and the DEF today and weighed it on the way to the outfitter. Front 5560 and rear 3820 total 9380 with me in the seat and all 3 tanks full. Bed is supposed to weigh about 1200 lbs. Bed should be installed by tomorrow. GVW is 19500 and FAWR is 7250, RAWR is 13500. The stock tires are rated even higher for there respective axles.
2017 Host mammoth, sold
49 states, 41 National Parks, 7 Provinces
2019 2 door Rubicon 6 spd.
2019 Berkshire XLT 45B
2022 Host Cascade
2021 Ram 5500 Air ride
|
jimh406
Western MT
Senior Member
Joined: 06/11/2006
View Profile
Offline
|
That would be handy. Thanks for posting the details about the weights, too!
|
Bedlam
PNW
Moderator
Joined: 06/13/2012
View Profile
|
Mine was 5320 lbs on the front and 4900 lbs on the rear with just my deck,two lower boxes, goose neck and SuperHitch without anyone in the truck. This is a Tradesman trim without the mid tank, so pretty close numbers if you consider all your extras in the cab.
Check your GVWR. The last time I looked, the 60" CA had a slightly lower 19,000 lb rating and the 84" CA got the 19,500 lb ratings.
The rear 111S axle is rated by Dana at 14,500 lbs although Ram derates it to 13,500 lbs. I have not found any other ratings or applications for the front Magna Steyr axle other than Ram's 7250 lb.
Chevy Sonic 1.8-Honda Passport C70B-Host Mammoth 11.5-Interstate Car Carrier 20-Joyner SandViper 250-Kawasaki Concours ZG1000-Paros 8' flatbed-Pelican Decker DLX 8.75-Ram 5500 HD
|
zb39
slippery rock
Senior Member
Joined: 10/26/2009
View Profile
Offline
|
Here is the bed installed.![[image]]([IMG]https://i.imgur.com/vgXdIGIl.jpg) [/img]
|
|
|
Bedlam
PNW
Moderator
Joined: 06/13/2012
View Profile
|
Looks nice, but I may have bias in my view.
zb39 wrote:Here is the bed installed.
![[image]](https://i.imgur.com/vgXdIGIl.jpg)
|
71stpsde
Tejas
New Member
Joined: 04/28/2017
View Profile
Offline
|
Nice looking truck. Love the color.
|
Bedlam
PNW
Moderator
Joined: 06/13/2012
View Profile
|
ZB39 has a few more pictures to share before he hits the road for his maiden voyage:
![[image]](https://i.imgur.com/U8OJIT1l.jpg)
![[image]](https://i.imgur.com/IS0Ybrjl.jpg)
![[image]](https://i.imgur.com/e7ECNqBl.jpg)
How many others campers will allow you stow the spare in the basement?
![[image]](https://i.imgur.com/zIWhRSCl.jpg)
Hmm, still plenty of room for other gear...
![[image]](https://i.imgur.com/31JRgyml.jpg)
If it's like mine, he most likely can see light between the pad and overload spring.
![[image]](https://i.imgur.com/sRx792ll.jpg)
Short range FastGuns is all you need to keep the camper on the rubber pad.
![[image]](https://i.imgur.com/DSPNAS8l.jpg)
I don't have a 7-way connector up front like ZB39:
![[image]](https://i.imgur.com/ZAQ2f6Rl.jpg)
* This post was
edited 03/08/18 02:22pm by Bedlam *
|
Ste7of1
Midwest
New Member
Joined: 09/07/2012
View Profile
Offline
|
Looks pretty nice. What’s your height clearance. Looks pretty tall.
|
Bedlam
PNW
Moderator
Joined: 06/13/2012
View Profile
|
Host camper specifications are 9.5' tall and the Ram truck decks are about 3.5' tall. I know mine when loaded sits higher than 13' but is under 13.5', so these specifications are approximations or my tape measure is optimistic.
|
|
|
