zb39

slippery rock

Senior Member

Joined: 10/26/2009

View Profile


Offline
|
Dealership called. The 5500 is here.........................
2017 Host mammoth, sold
49 states, 41 National Parks, 7 Provinces
2019 2 door Rubicon 6 spd.
2019 Berkshire XLT 45B
2022 Host Cascade
2021 Ram 5500 Air ride
|
jimh406

Western MT

Senior Member

Joined: 06/11/2006

View Profile


Offline
|
Pictures or it didn't happen. Ok, joking considering the photobucket fiasco!
'10 Ford F-450, 6.4, 4.30, 4x4, 14,500 GVWR, '06 Host Rainer 950 DS, Torklift Talon tiedowns, Glow Steps, and Fastguns. Bilstein 4600s, Firestone Bags, Toyo M655 Gs, Curt front hitch, Energy Suspension bump stops.
NRA Life Member, CCA Life Member
|
mike/kellie

northern calif.

Senior Member

Joined: 09/03/2008

View Profile


Good Sam RV Club Member
Offline
|
Pretty cool! How long before the bed is manufactured and installed?
2015 Host Mammoth triple slide w/ TorkLift Fastguns
2015 Ram 5500 SLT cab & chassis with Douglass 9' utility body
|
billyray50

North Dallas

Senior Member

Joined: 05/23/2009

View Profile


Good Sam RV Club Member
Offline
|
Pics please!
|
zb39

slippery rock

Senior Member

Joined: 10/26/2009

View Profile


Offline
|
Truck came in at 60 inches cab to axle. The bed I arranged to buy won't work. trlying to find another. I'm supposed to leave the 3rd on a trip. Not good.
|
|
Wikel

Kansas City

Full Member

Joined: 10/18/2016

View Profile

Offline
|
zb39 wrote: Truck came in at 60 inches cab to axle. The bed I arranged to buy won't work. trlying to find another. I'm supposed to leave the 3rd on a trip. Not good.
Unfortunate to hear.
|
mike/kellie

northern calif.

Senior Member

Joined: 09/03/2008

View Profile


Good Sam RV Club Member
Offline
|
Boy, that's tough to hear. You have everything researched and in place, then this. Your truck dealer must be in shock as well. Good luck with this
|
work2much

On the Road

Senior Member

Joined: 12/30/2006

View Profile

Offline
|
zb39 wrote: Truck came in at 60 inches cab to axle. The bed I arranged to buy won't work. trlying to find another. I'm supposed to leave the 3rd on a trip. Not good.
I see from this thread you initially ordered the 60" and changed it later with a call to the dealer. I assume the dealer dropped the ball? If so can they find you a comparable or better equipped truck already on a lot somewhere?
2022 Ram 3500 Laramie CTD DRW Crew 4x4 Aisin 4:10 Air ride.
2020 Grand Design Solitude 2930RL 2520 watts solar. 600ah lithium. Magnum 4000 watt inverter.
|
Bedlam

PNW

Moderator

Joined: 06/13/2012

View Profile


|
Could you get a temporary tray fabricated for the base of the Host and some plastic wheel well covers so you can make your scheduled trip and deal with the details once you return?
The edges would be 2x2" angle with some cross supports. A 3/4" piece of plywood with rubber mat would finish it off. This cradle would be bolted to the frame rails and some triangular shaped camper tie down points bolted off the frame could go to your turnbuckles.
* This post was
edited 02/27/18 03:35pm by Bedlam *
Chevy Sonic 1.8-Honda Passport C70B-Host Mammoth 11.5-Interstate Car Carrier 20-Joyner SandViper 250-Kawasaki Concours ZG1000-Paros 8' flatbed-Pelican Decker DLX 8.75-Ram 5500 HD
|
mike/kellie

northern calif.

Senior Member

Joined: 09/03/2008

View Profile


Good Sam RV Club Member
Offline
|
Bedlam wrote: Could you get a temporary tray fabricated for the base of the Host and some plastic wheel well covers so you can make your scheduled trip and deal with the details once you return?
The edges would be 2x2" angle with some cross supports. A 3/4" piece of plywood with rubber mat would finish it off. This cradle would be bolted to the frame rails and some triangular shaped camper tie down points bolted off the frame could go to your turnbuckles.
This was a choice I had to make when I was faced with selling my 3500 and having only the C & C to deliver the camper to my truck bed outfitter. I actually passed on an offer to sell the GMC and kept both trucks for a couple months until it got closer to production. I had put a lot of thought into fabricating a temp. platform for an easier delivery but opted out. Man....to have a special ordered truck not right-that's not right.
|
|