Msgtsniper

Kalispell

New Member

Joined: 07/22/2015

View Profile

Offline
|
I didn't see an actual temperature adjustment on my water heater, but it's kinda hard to look all the way around it. Let me know what you think of the sway bars.
09 Road Warrior RWM3400
|
Msgtsniper

Kalispell

New Member

Joined: 07/22/2015

View Profile

Offline
|
My leaf spring hangers are bolted on, was a tight squeeze to get at. What year is yours?
|
TheoWarrior

near durango Colorado

Full Member

Joined: 06/27/2008

View Profile


Good Sam RV Club Member
Offline
|
My rig is supposedly a 2009 34 RWM.
I found this in another forum
“”From what I understand if you have the rivets the fuel tank has to be dropped in order to drill out the rivets otherwise you can't get a drill in there. If I had the rivets I would pay to have it done. Grinding off the heads, drilling out the rest and dropping the tank is not a job for us old guys. Also I think the idea is to have both sway bars to increase performance. If you could replace the stock one with the Roadmaster I don't think you would gain anything. The stock bar on my rig looks pretty heavy duty.””
|
TheoWarrior

near durango Colorado

Full Member

Joined: 06/27/2008

View Profile


Good Sam RV Club Member
Offline
|
the stock sway bar is just as massive as the roadmaster so I think I’m gonna try without it for a while and see if adding just the front sway bar helps.
|
kmiller

San Diego

Full Member

Joined: 11/18/2014

View Profile


Good Sam RV Club Member
Offline
|
Checking to see if anyone had worked on their bathroom fan ? My fan stopped working, in believe there's a little plunger that works with the vent door opening that pops up allowing the fan to work. I'm trying to find the plunger?
|
|
|
ksanford

Pensacola

New Member

Joined: 04/05/2013

View Profile


Good Sam RV Club Member
Offline
|
I can't help you, but that's interesting. My fan stopped working today. It isn't a plunger, it is a switch, but this fan may not be original to the MH.
|
ronfisherman

SE Michigan

Moderator

Joined: 06/05/2006

View Profile


Good Sam RV Club Member
|
If you have a Fantastic Fan. There are many models. https://www.fantasticvent.net/ Check this site out for different models. Then check out the different controls on yours.
2004 Gulf Stream Endura 6340 D/A SOLD
2012 Chevy Captiva Toad SOLD
|
TheoWarrior

near durango Colorado

Full Member

Joined: 06/27/2008

View Profile


Good Sam RV Club Member
Offline
|
ksanford wrote: I can't help you, but that's interesting. My fan stopped working today. It isn't a plunger, it is a switch, but this fan may not be original to the MH.
My bath fan quit working a while ago and I removed the inner trim and found that the wiring was very loosely connectted wire nuts the came apart. you might want to do the same .
The people who wired our motorhome together did a really bad job. I found several other electrical wiring issues like the electric transfer switch….,the stereo wires was loose, etc.
|
ksanford

Pensacola

New Member

Joined: 04/05/2013

View Profile


Good Sam RV Club Member
Offline
|
Theowarrior
To connect the new TV to the stereo, I ordered Prozor Digital Analog Converter (DAC) from Amazon. Connect the DAC to the optical audio out (TOSLINK).
Remove the auxillary adapter from the stereo cables. Connect the stereo cables to the LR ports on the DAC. Turn on the DAC, select TOSLINK as the input. Turn on the Sony stereo by the door and repeatedly press the source button until you find which one plays through the speakers. Ours works on CD2.
Hope this helps. Glad to answer any questions.
|
kmiller

San Diego

Full Member

Joined: 11/18/2014

View Profile


Good Sam RV Club Member
Offline
|
Bathroom fan: Thanks for the help on my fan the dome switch plunger was found on the top driver side On the hinge side. I removed the dome switch plunger 3/8 " combination and cleaned & sprayed it with silicone as suggested. Works great, hardest part was climbing on top, I'm getting to old for that, my wife was more worried that I was going through.
My fan was 2007 model B8100 create-a-breeze made by Fan-Tastic Vent, now Domestic. The plunger is K1122-05 . Phone # 800-521-0298
Thanks for the suggestion ot was great !
|
|
|