Open Roads Forum

Print  |  Close
Page of 312  
Prev  |  Next

Topic: So what did you do to your Truck Camper today?

Posted By: chobe2 on 01/19/17 08:14am

[email protected] wrote:

Many many thanks to Tizi for this great idea. As noted, a tight fit, but now the front wardrobe on our Igloo is a lot more practical. Installed ELFA baskets. Had to assemble them inside the wardrobe because they are a tight fit but the space is now far more practical.

[image]


I like it! So...it's just a free standing frame with drawers of various sizes? Where did you purchase yours? Do you have the model numbers by any chance?


2015 Ram 3500, 6.7L Cummins Turbo Diesel, SB, SRW, 4WD, Fox Shocks, Helwig Bigwig, Timbrens, Torklift Talons & Fastguns

2007 Lance 845 WIP - Wish List: 200w Solar, MPPT Controller, Two AGM Batteries, 1500w Inverter, Microwave, Awning(s), etc...More Money!



Posted By: Bedlam on 01/19/17 08:33am

Here's elfa's USA website: http://www.containerstore.com/elfa/index.htm


Chevy Sonic 1.8-Honda Passport C70B-Host Mammoth 11.5-Interstate Car Carrier 20-Joyner SandViper 250-Kawasaki Concours ZG1000-Paros 8' flatbed-Pelican Decker DLX 8.75-Ram 5500 HD



Posted By: [email protected] on 01/19/17 05:18pm

Here is the frame model and size I used.

Medium 7-Runner Frame Platinum
SKU#: 10013321
18" x 21" x 29" h

My wardrobe opening is 17" but about 20" on the interior so I have to assemble the frame in the cabinet - not a big deal - it just hammers together with a rubber mallet.

I chose a variety of basket sizes but here is the SKU for the large basket. We also chose the platinum mesh - they also have white and perhaps other colors (IDK) but I like the platinum.

elfa Medium Mesh 3-Runner Platinum
SKU#: 10022535
16-7/8" x 20-3/4" x 11-1/4" h
t
Here is the link to the page that has the frames and drawers. Good luck. http://www.containerstore.com/s/elfa/components/elfa-drawers-accessories/123


Shawn
2013 Ford F350 6.7 CCLB Ruby Red SRW, sway bar, Bilsteins, etc
2007 Cyclone toyhauler, 18,000 GVWR
Northstar Igloo 9.5
https://photos.smugmug.com/photos/i-2J3zF6J/0/M/i-2J3zF6J-M.jpg
US Army retired



Posted By: Cabman 850 on 01/19/17 06:40pm

Installed the Lagun table mount for the dinette table. What a big difference, wish we would have done this sooner as it creates so much additional room.


Posted By: chobe2 on 01/20/17 05:40am

Cabman 850 wrote:

Installed the Lagun table mount for the dinette table. What a big difference, wish we would have done this sooner as it creates so much additional room.


Do you have photos?


Posted By: thedavidzoo on 01/20/17 06:17am

Put up homemade ply and foam covers for 4 solar panels and heki skylight. We are parked under a large messy tree. So this will hopefully protect from debris and ice falling during the winter.


2014 Ram 3500 CrewCab Diesel DRW 4x4 4.10 Aisin, Torklift Fastguns, Upper Stableloads, Timbrens
2017 Northstar 12' STC
640W solar, 400Ah lithium LiFeMnPO4 batteries


Posted By: GCasta on 01/20/17 09:23am

chobe2 wrote:

Cabman 850 wrote:

Installed the Lagun table mount for the dinette table. What a big difference, wish we would have done this sooner as it creates so much additional room.


Do you have photos?


X2. Would be great ro see a few pictures[emoticon][emoticon]


2015 Dodge Ram 3500 SRW
2014 Montana Mountaineer 331 RLT
2016 Lance 850


Posted By: work2much on 01/20/17 05:38pm

We decided to remove the microwave since we never use it and repurpose the space to bring along some stuff we will use. (pic of microwave not our camper but similar)

[image]

Removing the unit revealed that there was essentially a mass junction box behind it.

[image]

So we framed it out with an easily removable back to make wiring accessible.

[image]

Wife is happy. We have room for a crock pot, coffee maker, soda machine and juicer.

[image]

We have some tension rods on order keep everything in place for travel.


Now, if the rain will quit for a day, the next project is to remove the AC unit and replace with a simple vent...


2022 Ram 3500 Laramie CTD DRW Crew 4x4 Aisin 4:10 Air ride.

2020 Grand Design Solitude 2930RL 2520 watts solar. 600ah lithium. Magnum 4000 watt inverter.


Posted By: mike/kellie on 01/20/17 05:56pm

Looks nice. I found a cabinet door company and had 6 various size doors made. I stained and finished and they look great. You have room now but if you removed that 2" blank and horizontal frame, you gain that much more and a door would match the adjacent. That's if....it's finished behind the blank front. I got lucky on mine except for 1.
It's fun to find new storage ideas and you did a nice job.


2015 Host Mammoth triple slide w/ TorkLift Fastguns
2015 Ram 5500 SLT cab & chassis with Douglass 9' utility body


Posted By: work2much on 01/20/17 06:11pm

mike/kellie wrote:

Looks nice. I found a cabinet door company and had 6 various size doors made. I stained and finished and they look great. You have room now but if you removed that 2" blank and horizontal frame, you gain that much more and a door would match the adjacent. That's if....it's finished behind the blank front. I got lucky on mine except for 1.
It's fun to find new storage ideas and you did a nice job.


Thanks. I think my wife is having more fun than me. [emoticon]


Print  |  Close
Page of 312  
Prev  |  Next