dedmiston
Coast to Coast
Administrator
Joined: 01/26/2004
View Profile
Good Sam RV Club Member
|
JMT2 wrote:Quick question.
When will this thread be closed?
![[image]](http://flamingsquid.com/images/overmydeadbody.png)
![[image]](http://flamingsquid.com/images/hell_freezes_over.jpg)
Any more questions?
2014 RAM 3500 Diesel 4x4 Dually long bed. AISIN trans & 4.10 rear. B&W RVK3600 hitch • 2015 Crossroads Elevation Homestead Toy Hauler ("The Taj Mahauler") • Hooligan #3
Toys:
- 18 Can Am Maverick x3
- 05 Yamaha WR450
- 07 Honda CRF250X
- 05 Honda CRF230
- 06 Honda CRF230
|
Macs Dad
SoCal
Senior Member
Joined: 04/04/2006
View Profile
 Offline
|
rb3500 wrote:htwheelz67 wrote:I have an 04 fs3000, been reading all the probs, I have inspected every part of my trailer and so far no issues whatsoever except the floor in front of the 1st swivel rocker is a little flimsy if you jump up and down, no sagging walls all compartment doors close good, frame and tongue look good. ?
i also have a 04 fs3000 and didnt have any issues with the tongue but my welder was out of work so I though i would have him do "the fix" for piece of mind.....had all the parts shop cut per "the fix" and they did not fit the angle was different so he modified the parts to add the support and gussets simmalar to the fix ....what i found out after was my frame was a erlyer frame that was bent and boxed at the transition from frame to tongue and the one shown on "the fix" was a welded connection...looking at it more i found my trailer was manifactured late 2002 and sold as 2004 and who knows when the frame was made and how long it sat before that....in short i think they changed frame design and/or manifacturers around the 2004 model....but realy like my trailer and have no major issues
The most recent tongue issue's discussed here were on the SuperLite pull trailers manufactured in 2005 sold in 2006 as 2006 models. I know that for sure. Not sure about any issue's on previous year trailers. If you do a search for WW re-calls or service notices I think there was something on the 04's but not sure if it was frame or tongue related.
D, that's a crack up ![[emoticon]](http://www.coastresorts.com/sharedcontent/cfb/images/biggrin.gif "biggrin") when H freezes over on your post.
I agree, this post shouldn't be closed anythime soon as there still seems to be some here posting questions ![[emoticon]](http://www.coastresorts.com/sharedcontent/cfb/images/scratchead.gif "scratchead") and buying used WW's.![[emoticon]](http://www.coastresorts.com/sharedcontent/cfb/images/confused.gif "confused")
2007 Weekend Warrior SL2805
20505 Chevy 2500 HD Crew Cab 6.0/410 Gasser
2008 Polaris RZR 800 With +6 Long Travel
2012 Kawasaki KX 250F
1990 Kawasaki JS 550 Jet Ski
|
chastjw71
NW Washington
New Member
Joined: 04/25/2010
View Profile
Offline
|
Well after much research, and then some more research, a few visits and many laying on my back frame inspection, I bought the 06 WW FK2100 it will be inspected before I take delivery of the trailer, and then I will bring it to an outside inspection where, as long as it is truely straight, they will weld on the re enforcement to the tongue. a $300-$500 deal now, is much better then a $2000-$3000 down the road.
|
callen06
st.charles, mo
New Member
Joined: 01/01/2008
View Profile
Offline
|
I have the same trailer and we really like it. Hope you do too!
|
chastjw71
NW Washington
New Member
Joined: 04/25/2010
View Profile
Offline
|
Love it so far, all 4 quads fit like a dream. it is in the shop right now getting the frame re inforced, $400, and while there I decided to have them roll the axles, or better said, re mount the axles with the springs on top giving me another 5 inches of clearance, and being I pull it with a lifted truck there will be no problem keeping level.
|
|
|
callen06
st.charles, mo
New Member
Joined: 01/01/2008
View Profile
Offline
|
I have thought about flipping the axles on mine to get a little more ground clearance. Let us know how it tows after you get yours done.
What kind of quads do haul? I haul 2 full size sportsmans and they pretty much fill the space. I added another tie down point in the center of the kitchen floor for tieing down the front quad. Made things much easier and more secure.
|
chastjw71
NW Washington
New Member
Joined: 04/25/2010
View Profile
Offline
|
I have 2 honda trx450R, and 2 honda trx250x I put them in sidways, all 4 go right to the kitchen. I'll let you know how it pulls, and send ya pics when its done.
|
RKING
Corpus Christi, Tx.
Full Member
Joined: 06/25/2009
View Profile
Offline
|
chastjw71 wrote:Love it so far, all 4 quads fit like a dream. it is in the shop right now getting the frame re inforced, $400, and while there I decided to have them roll the axles, or better said, re mount the axles with the springs on top giving me another 5 inches of clearance, and being I pull it with a lifted truck there will be no problem keeping level. I have a 2006 WW FS2300, did the repair shop use the suggested fix for your repair?
2006 WW FS2300
2010 Street Glide
2009 Nightster
2008 Silverado
|
portscanner
Georgia
Senior Member
Joined: 01/02/2007
View Profile
Offline
|
Slightly off topic, but I thought someone would appreciate it.
I discovered parts of the old Weekend Warrior web site are still out there.
http://www.warriormfg.com/factory_tour.htm
http://www.warriormfg.com/9full-throttle.htm
One beautiful wife
Mattie and Trooper the furcampers
2019 Dodge 4500 with 2008 Lance 1181
2015 Jeep Wrangler toad w/ ReadyBrake/Brute
Web Site
|
elstopo
Elko, Nevada
New Member
Joined: 08/15/2010
View Profile
Offline
|
My 07 SLC3905 is showing signs of pinbox cracking. The front closet floor is raising and the fiberglass around the pinbox is bowing. I was wondering if I should dig into this and repair it or is it covered under the class action?
Thanks in advance.
|
|
|
