| Topic: How many of us are there? Owners of Dodge based RV's? |
|
Posted By: Airmon
on 03/23/05 02:49pm
|
Hi all,
I'm joining the Dodge club. We just bought '79 Beaver 25' Class C, we go to pick it up in a little over a week. I'll post pictures once we have it and let everyone know how the trip went. We're very excited to move from a TT to a Class C and eager to play with our new/old camper. It's the perfect layout and has virtually everything that we wanted.
Eric
2003 HR 29RBD/2006 Liberty CRD
Big Pine Key, FL
www.jenericramblings.com
|
|
Posted By: Scruffy5
on 03/24/05 05:30am
|
Okay I'm convinced,I've been checking the local parts stores around here,they can get me a Edelbrock,but can't find a application for a 440.all they come back with is a replacement thermoquad!how big and what carb# so i can say give me this and that and how much of the quad linkage do i save?did you go performer 600cfm like Westexus or 750? thanks and how big of a hammer did you use?
Scruffy 1977 25'Allegro
|
|
Posted By: westtexus
on 03/24/05 06:26am
|
Measure the primaries on your thermoquad, one inch is 800 cfm, 1 1/2 inch is 850 cfm, and the 1000 cfm is marked performance series. As I understand it only these sizes were made. I ended up with a 600cfm because I did not know this at the time and trusted the guy behind the counter. Although I have read on a carb web site that 600cfm is good for engines up to 300 HP.
Edelbrock tech support told me they no longer make a direct replacement, requiring an adapter from spreadbore to squarebore.
Westtexus 1991 Fleetwood Flair
 m.jpg)
|
|
Posted By: Scruffy5
on 03/27/05 04:07am
|
Hey where did everybody go?Iposted this somwhere but in the wrong forum probably! einstein i'm not.I must be the only one left with a Dem Old Dudes Go Everywhere
|
|
Posted By: Scruffy5
on 03/27/05 04:13am
|
Does anyone know where i can find a replacement wheel cover for 17.5 budd wheel? i lost one somewhere!
|
|
Posted By: JoeMac1000
on 03/27/05 09:19pm
|
Scruffy5...
Try E-Bay, under the automotive section. Search Hub Caps or Wheel Covers.
JoeMac![[emoticon]](http://www.coastresorts.com/sharedcontent/cfb/images/cool.gif "cool")
JoeMac1000
73' Minnie Winnie, 360.
Still up and running strong. ">
A bad day of fishing sure beats a good day at work! ">
|
|
Posted By: new v'er
on 03/28/05 12:38pm
|
What is the difference between a 16" or 16.5" wheel and "Budd Wheels" of the same size and will I be able to tell the difference by just looking at th ones on my rig?
Regarding your LOT in Life: Build something on it ... or park your Dodge on it.">
Bill & Laurie
1976 Dodge Sportsman Midas Mini 226
|
|
Posted By: Scruffy5
on 03/28/05 09:56pm
|
Mine on the inside of the rim where the tire meets rhe rim it says budd and then a wheel number.I didn't no that until 2 weeks ago until i started shopping for replacement wheels.Budd wheels like mine have a bump on the hub and a line up whole in the rim,what for i'm not sure.Also orignally i guess budd wheels were a two piece wheeland you couldn't use tubeless or radial tires just tube type.Mine have tubeless tires on them and sometime this week new radials put on.hope this helps,if i'm wrong maybe someone can help us both out.by the way Budd wheels was actually a co.and they been out of business for a number of years.
|
|
Posted By: new v'er
on 03/29/05 06:14am
|
Thanks Scruff
|
|
Posted By: travcojim
on 03/29/05 03:53pm
|
Just a short note to say Hello, I have a 67 travco that has been gone thru top to bottom and runs like a new rig, It now has the 440 with a new tranny and a Dana rear end. Glad to see so many dodge fans out there. I am in Northwest Arkansas. ![[image]](http://freesites.cyberosis.net/travcojim/travcoout1.jpg)
* This post was
edited 03/29/05 10:04pm by travcojim *
|
|