AISURFFISH
BERLIN MARYLAND
Senior Member
Joined: 01/28/2004
View Profile
Offline
|
.
2017 F350 6.2L Crew Cab
Arctic Fox 990 2021 TORK-LIFT FAST GUNS AND SUPER HITCH
COOLER RACK OFF THE FRONT ALWAYS FULL OF FISHING RODS TICA TO BE EXACT
|
JohnHeinz
Tampa, FL
New Member
Joined: 11/30/2020
View Profile
Offline
|
Quote:
That's a nice-looking Jeep, jshupe. The wheels are amazing too. What specific rims are they?
* This post was
edited 04/22/21 05:00pm by JohnHeinz *
|
AISURFFISH
BERLIN MARYLAND
Senior Member
Joined: 01/28/2004
View Profile
Offline
|
|
MORSNOW
Mountain Home, ID
Senior Member
Joined: 10/29/2013
View Profile
Good Sam RV Club Member
Offline
|
Washed and waxed. Inspecting and re-sealing around the roof next. (edit) That's the side of my garage reflecting off of the camper.
* This post was
edited 03/22/21 10:10am by MORSNOW *
2014 Wolf Creek 850SB
2012 GMC Sierra SLT 2500HD
7,220# Truck/10,400# Camper Fully Loaded
|
n0arp
FT
Senior Member
Joined: 08/20/2016
View Profile
Offline
|
Thanks. Vision Nemesis 111 machined, with painted rash ring.
* This post was
edited 03/23/21 09:49am by an administrator/moderator *
|
|
fj40cruiser
Minneapolis
New Member
Joined: 04/11/2021
View Profile
Offline
|
|
fj40cruiser
Minneapolis
New Member
Joined: 04/11/2021
View Profile
Offline
|
*Added the image tags to the picture location and size definition
* This post was
edited 04/12/21 01:39pm by an administrator/moderator *
|
Colin Doyle
Minnesota
New Member
Joined: 04/13/2021
View Profile
Offline
|
Hey, I'm new here. I bought this 1996 Texson camper last year from an older couple who had kept it in nice shape. I did some basic maintenance and upgrades (deep clean, new battery, onboard battery tender, 100% LED lighting retrofit, etc.) and then built a subframe to elevate it over the fairing on my F650's flatbed, and incorporated fork pockets and lockable storage. The camper is permanently "tied down" to the galvanized subframe, and the subframe is secured to the flatbed with nylon webbing straps. When I mount it, I just lift it up with my forklift and back under it. The truck's air suspension usually runs 25-30 psi with the camper mounted, so it's a nice cushy ride and it doesn't hammer the camper to death. Total height is about 12'6" to the top of the AC unit.
I just finished de-winterizing the camper, and I'm getting ready to take a 2-3 day trip down to Cedar Rapids, IA this weekend. Looking forward to putting some miles on it this summer, although it's already paid for itself in hotel savings.
The day I dragged it home - had to bring a car trailer because it didn't fit on the truck.
The basic subframe, minus the sheet metal panels.
The subframe parts and ladder, fresh out of hot-dip galvanizing.
The tiedown strategy. (I have incorporated a spring-loaded rear tiedown since the photo was taken.)
Plenty of lockable, albeit not weather-tight, storage. This was a boondocking trip to a campsite way off the beaten path, near Duluth, MN. If you're going to drive a big truck 20 miles down a logging road, bring a chainsaw.
That ladder hangs on the camper's roof ladder when it's stowed. (I added grip tape after this photo was taken.)
|
gsbuick65
Southaven Ms.
Full Member
Joined: 03/20/2006
View Profile
Good Sam RV Club Member
Offline
|
Just got this one, gotta beef up the suspension https://photos.app.goo.gl/oTcmb6ZYReRzYBjJ9
mike
1988 Pace Arrow 28' sold
2002 Lance 1130 sold
2008 v-lite 30lrs sol
2014 Sunset trail reserve 30re
2005 Dodge 2500 quad cab 4x4 CTD
Southaven Ms.
|
JohnHeinz
Tampa, FL
New Member
Joined: 11/30/2020
View Profile
Offline
|
jshupe wrote:
Thanks. Vision Nemesis 111 machined, with painted rash ring.
Thanks, jshupe! I might as well add that to my shopping cart when I visit 4WheelOnline one of these days.
|
|