2nd time this month that the camper got washed.
2021 Arctic Fox 1150
'15 F350 6.7 diesel dually long bed
Eagle Cap Owners
“The best lack all conviction, while the worst
Are full of passionate intensity." -Yeats
The paint was a pain to remove. Its as if Lance did not etch the aluminum before the originally painted it. So consequently the rubber that was glued to it came up.
2016 F-250 S.D.XLT Crewcab 4X4 auto SB 6.2 gas Hellwig R anti sway Bilsteins airlift bags Front receiver hitch Torklift Talons+stabil loads Michelins 3,640lb tires.
2006 Lance 861 Honda 2000 gen. Golf cart batteries(2) led lighting polarcub Airconditioner
My Blog - The Journey of the Redneck Express
CB Channel 17 Redneck Express
'1992 Dodge W-250 "Dually" Power Wagon - Club Cab Long Bed 4x4 V8 5.9L gashog w/4.10 Geared axles
'1974 KIT Kamper 1106 - 11' Slide-in
'2006 Heartland BigHorn 3400RL
JoeChiOhki wrote:
Put the tarp back on the roof so its ready for the rain
Put the tarp back on the roof so its ready for the rain
+1
2011 F350 6.7L Diesel 4x4 CrewCab longbed Dually, 2019 Lance 1062, Torqlift Talons, Fast Guns, upper and lower Stable Loads, Super Hitch, 48" Super Truss, Airlift loadlifter 5000 extreme airbags
Redneck bling wrote:
Added LED lighting. Stripped the failing white paint from the aluminum bumper and steps. Researching how to recoat. Love the LED tube lights. Rewired the fixtures bypassing the ballast. Went with m4 and natural white. like it alot. All inside lighting is now LED and the outside porch lights too. I do not see any loss in illumination.
The paint was a pain to remove. Its as if Lance did not etch the aluminum before the originally painted it. So consequently the rubber that was glued to it came up.
Added LED lighting. Stripped the failing white paint from the aluminum bumper and steps. Researching how to recoat. Love the LED tube lights. Rewired the fixtures bypassing the ballast. Went with m4 and natural white. like it alot. All inside lighting is now LED and the outside porch lights too. I do not see any loss in illumination.
The paint was a pain to remove. Its as if Lance did not etch the aluminum before the originally painted it. So consequently the rubber that was glued to it came up.
Had the same issue with the Lance I sold. I used Zinzer stripper to pull the old paint off (safe on aluminum) and then washed it real well with strong derergent and my pressure washer, let it dry amd mist coated it with zinc chromate primer and top coated it with Rustoleum gloss white. Mine was coming off in strips as well. Very poor prep on the part of Lance.
2015 Backpack SS1500
1997 Ford 7.3 OBS 4x4 CC LB
Bob
2011 Ford F-350 PSD SC DRW
2008 Bigfoot 25C-10.4E
Firestone airbags - torklift stable-loads,fastguns,Talons Rancho rs 9000XL’s.
![[image]](http://i145.photobucket.com/albums/r214/ggadwa/DSC_3334%202_zpsb3guul7y.jpg)
![[image]](http://i145.photobucket.com/albums/r214/ggadwa/DSC_3331%202_zpsycigc1tk.jpg)
![[image]](http://i145.photobucket.com/albums/r214/ggadwa/DSC_3333%202_zpsbpj1n4b6.jpg)
HAM RADIO Operator since 1964 'W7FSI'
EAGLE CAP 2011 950 CUSTOM BUILT by the great folks at LaGrande Oregon
2012 FORD 350 XLT 6.7L Diesel 4x4 Super Cab with lots of stuff
Installed a handle on the screen door
Added magnet to hold open the cargo doors
Replaced the tall A/C with a low profile heat pump
Installed TOrklift Glowsteps....
Then later I added the Stow-n-Go bracket
Ditched the bat wing antenna head and installed this one
Upgraded to AGM Batteries
New window and shade in the door
2009 Silverado 3500HD Dually, D/A, CCLB 4x4 (bought new 8/30/09)
2018 Arctic Fox 992 with an Onan 2500i "quiet" model generator
And I installed a Torsion Axle Lift kit on it.