Open Roads Forum

Print  |  Close
Page of 312  
Prev  |  Next

Topic: So what did you do to your Truck Camper today?

Posted By: nkrantz on 03/13/12 05:36am

Gave it a new truck. Added led lights to inside and motion sensor lights outside,

[image]


AF 1140 2 optima yellow tops Honda eu3000 honda eu 2000 companion

2012 Ram 3500 DRW Roadmaster Sway Bar, Airbags, stableloads, superhitch, Buckstop bumper, carli lift, Alcoa's with 3970lb toyo AT's


Posted By: joerg68 on 03/13/12 06:32am

No pictures, and not today but over the past weekend:

- thoroughly cleaned the outside
- fixed a kink in the water tank pressure relief line. Much better water fill now :-)
- filled fresh water tank
- hooked up LPG
- tested all systems

... ready to go on the first trip for 2012!

-J


2014 Ford F350 XLT 6.2 SCLB + 2017 Northstar Arrow



Posted By: JumboJet on 03/13/12 06:51am

nkrantz wrote:

Gave it a new truck. Added led lights to inside and motion sensor lights outside,

[image]


Is that a TDR emblem on the grill?


Posted By: nkrantz on 03/13/12 07:09am

JumboJet wrote:

nkrantz wrote:

Gave it a new truck. Added led lights to inside and motion sensor lights outside,

[image]


Is that a TDR emblem on the grill?


Yes sir are you a member


Posted By: RockyRoadCamper on 03/13/12 07:30am

I talked to a truck service place about adding one main leaf spring to each side of my 2008 F-450. Have to use new spring bolts. Cost estimate around $500-$600. Think I will do that next week. No sag or sway or steering issues now but the back of the truck is still lower with the big Okan t/c with two slides. I have tried several things, best so far is the block-name?-between the springs and helper springs that gets more use out of the helper single spring, but as the back is still lower I want it level and I do not want air bags. Timbens did not do anything I can tell.


Posted By: joe123 on 03/13/12 08:36am

replaced the power converter,with one that will keep my batteries charged,replaceing the hood fan with something that will not make so much noise, replaced both valve to propane tank lines with old style not the plastic nut i need to use a wrench to tighten.More later as we are going to alaska and the yukon for two months starting in may.


Posted By: JoeChiOhki on 03/13/12 11:33am

Heading back to Home Depot because the bulbs I first got worked, but the ones I decided to switch to won't, so one more time into the breach!


My Blog - The Journey of the Redneck Express
CB Channel 17 Redneck Express
'1992 Dodge W-250 "Dually" Power Wagon - Club Cab Long Bed 4x4 V8 5.9L gashog w/4.10 Geared axles
'1974 KIT Kamper 1106 - 11' Slide-in
'2006 Heartland BigHorn 3400RL



Posted By: MAV 8801 on 03/14/12 07:56am

Got home earily last night..and de-winterized the TC..flushed the lines and tank with water and bleach.. Gave it a good rinse this morning; refilled the tank and letting it drain again..Also oiled the Wineguard antenna and all the locks..


2011 Palomino Maverick 8801, 2005 Chevy 2500HD Crew Duramax/Allison, Timbrens, Bilsteins, Michelin LTX M/S2, Hypertech programer & Honda Eu2000



Posted By: JoeChiOhki on 03/14/12 11:13am

Got my new light fixture installed [emoticon]. It makes the old lights look extremely dim by comparison! [emoticon]


Posted By: Mello Mike on 03/14/12 11:26am

JoeChiOhki wrote:

Got my new light fixture installed [emoticon]. It makes the old lights look extremely dim by comparison! [emoticon]


Pics? [emoticon]


2016 Northstar Laredo SC/240w Solar/2-6v Lifeline AGMs/Dometic CR110 DC Compressor Fridge
2013 Ram 3500 4x4/6.7L Cummins TD/3.42/Buckstop Bumper with Warn 16.5ti Winch/Big Wig Rear Sway Bar/Talons w/SS Fastguns
My Rig
1998 Jeep Wrangler
US Navy Ret.


Print  |  Close
Page of 312  
Prev  |  Next