Coast Resorts Open Roads Forum: Travel Trailers: Keystone Bullet Premier

Print | Close

Topic: Keystone Bullet Premier

Posted By: FensterRV on 04/05/11 04:37am

Nice job. The parts guy at Camping World is calling me back later this morning with a price on the new table today but I would bet a beer that the price is going to come back way too high and I will be following your mod for the table.

2011 Bullet Premier 31BHPR with comfort package
Pro Pride Hitch w/ Prodigy P2.
Steadyfast Stabilizers
Pulled by "Big Daddy", aka 2000 Ford Excursion.

Posted By: kainen on 04/05/11 12:23pm

I agree nice job but how is the stablilty ? I found the larger diameter feet I used helped make the table feel more stable. I will try to take a photo of mine in the next day or so and post it.

Posted By: garysol on 04/05/11 12:30pm

kainen wrote:

I agree nice job but how is the stablilty ? I found the larger diameter feet I used helped make the table feel more stable. I will try to take a photo of mine in the next day or so and post it.

Stability is just fine. I made sure to tighten down the nuts once I had the desired height and that firmed everything up.
I still would rather have a pedestal type dinette.

2020 GMC Canyon
2022 NoBo 19.2

Posted By: msalyer on 04/05/11 02:15pm

NetAndDavid wrote:

msalyer wrote:

Make sure your fan is set to auto. If it is set to high or low (don't remember which) the ac fan runs at the same time as the furnace.

Dang it, my wife said I was doing something wrong, now I have to admit it to her. The A/C fan was running the whole weekend, and she said I had it set up wrong, now I know that I did.

Sorry about that...lol

I only knew because our dealer told us this during our walk through. They did a real nice job.

Posted By: apseric on 04/05/11 02:17pm

We have the 2011 31BHPR so I thought I would share: We just replaced our leveling scissor jacks with new ones. The new ones are rated for 6500# each (factory ones are 2500# ea) and we paid 128.27 (includes shipping) for all 4 from Mantelli Trailer Sales, inc via EBay. They hang down about a half-inch more than the factory ones (negigable). The 2 boxes (2 jacks per box)were in perfect condition as were the contents. The swap was super easy (I replaced all the mounting hardware with galvanized as the existing hardware had already rusted). For now, they are installed with self-drilling screws & lockwashers, but I would like to try out the "Save-A-Jack" product and possibly have those welded on by my dealer.

Posted By: RainbowsEnd on 04/05/11 08:06pm

FensterRV wrote:

Does any Bullet owner own the Adco designer cover? From what I've read this seems to be a good choice.

Not sure if anyone answered this or not, maybe this bump others may see your post and have comments. I don't use a cover. There are probably just as many that like them as hate them. I'm sure a general search on this forum will show the pros and cons. If you do get one please share your experience with us. Does it leave the swirl marks so often found with using them? What does it do with the paint or decals? It is just so windy here it's hard to use them and just not recommended. It may take a season to find how it works out for you. If you get one keeps us in mind with a review later. Good luck!

PS: 16 days to go!

F250 Diesel Lariat
Laissez les bons temps rouler!

Posted By: FensterRV on 04/06/11 08:46am

I'm def going with the cover and will be happy to provide reviews. I have read all the posts re: the pro's and con's of RV Covers, and my take away points are the RV will look as clean as it did when I covered it. The wind isnt too much of an issue here in South NJ.

My biggest question is would I recover the TT between trips during the camping season if it was more than a few weeks between trips. I'm hoping it doesnt take more than 20-30 minutes to cover. I've been told I can do it within 15 min by people you do cover their TT's.

Posted By: FensterRV on 04/06/11 09:04am

Does the color of the table and pedestal change based on your interior choice? ( Blackbery, Sage etc) I'm dealing with a few rocket scientists at camping world, and because I have the cheesy comfort package table, I want to switch out to the traditional table but they can't run the part # request from my VIN because of that package showoing up.

If you guys could snap a few pictures of your table to see if there is any variation based on different interior choices that would be great. I find it hard to believe they make different tables for the 4 or 5 diff. interior choices. TY in advance

Bullet Bill

Posted By: CampinEarls on 04/08/11 06:53am

FensterRV wrote:

Here is a picture of mine. I'm not sure about different tables for each interior color, mine does match the counter top though.

2009 Chevy Z71 CrewCab
2010 Bullet Premier 31BHPR

Posted By: RainbowsEnd on 04/08/11 08:04am

CampinEarls wrote:

Here is a picture of mine. I'm not sure about different tables for each interior color, mine does match the counter top though.

This looks like mine also and I know it matches the counters. I've the Godiva interior. Honest when I go to the Premier website to look at pictures all the counters and tables look like they all have the same finish. That would make sense to me as a rv builder, oooops what am I saying!

Print | Close