bobndot
NY
Senior Member
Joined: 08/21/2007
View Profile
 Offline
|
Did you try looking here ?
http://www.rv.net/forum/index.cfm/fuseaction/thread/tid/24581263.cfm
camper loading/jacks/hauling/tie downs shows guides
you could install something on the bottom of the camper too.
http://www.rv.net/forum/Index.cfm/fuseaction/thread/tid/16957495.cfm
|
mkirsch
Rochester, NY
Senior Member
Joined: 04/09/2004
View Profile
|
The beauty of building a box out of 2x4s and plywood is you end up with a 3-1/2" high "basement" for storing stuff. Fishing poles, ladder, hoses, the tow strap, tools.... The possibilities are ENDLESS!
2x4 on edge is about 3-3/8" plus 23/32" (what they call 3/4") ply is about 4".
2002 Chevy 3500 DRW 8.1L/Allison
2000 Palomino B1500
...and the reason why I need a DRW to haul a Palomino:
2004 United 7x14 tandem axle enclosed toy trailer
2011 PJ 8x20 7-ton deckover equipment trailer
|
sundowners
suffolk UK
Senior Member
Joined: 04/14/2007
View Profile
Offline
|
its a good idea to use the space created----------but if your camper drops over the back of your truck bed-----like ours-----how would you access it ? (without removing the camper)
Nigel & Pamala------Spain
|
arto_wa
SW, WA
New Member
Joined: 02/25/2007
View Profile
|
I have two layers of 2" HD pink foam, on top of a rubber mat!
* This post was
edited 02/11/12 12:19pm by arto_wa *
99 F350 4x4 CC DRW 7.3L PSD, 97 Bigfoot 10.6
89 Duckworth 17' Pro 302
|
|
|
