carp65
Sioux Falls, SD
Senior Member
Joined: 08/26/2004
View Profile
Good Sam RV Club Member
|
Drawers for silverware, pots & pans, etc. have metal rides that
fit into plastic brackets against the back wall. Bought some
new plastic brackets to replace with, but the metal slides on the
drawers are too wide and do not fit the plastic brackets.
We have a 2005 GeorgieBoy Pursuit. Any suggestions as to where I
might find either the plastic brackets that will fit the metal slides
or metal slides that will fit the plastic brackets I already have.
All suggestions will be greatly appreciated.
|
pkunk
Questa, NM
Senior Member
Joined: 12/28/2007
View Profile
 Offline
|
Take a slide & the bracket to a good hardware store (maybe Lowes) and find a match. There are too many different ones. I have bags of brackets that don't fit any slides I've had.
1999 Coachman Mirada 34 ft.V10-F53 chassis
12ft.LR slide-2 gp31 AGM 12V @220AH
|
okeehandyman
south florida
Senior Member
Joined: 02/02/2005
View Profile
Offline
|
Instead of a place like Lowes, I would suggest looking for a business that supplys cabinet hardware to the trade. There you will find a much larger selection. Also, you may just find someone that, being in the business, has seen the style you need in his years of experience.
|
MountainAir05
New Mexico
Senior Member
Joined: 01/27/2007
View Profile
Offline
|
measure it and go all metal.
|
Hatman
Columbus, OH
Full Member
Joined: 05/30/2006
View Profile
|
Rockler is a great place for cabinet hardware:
http://www.rockler.com/
If there's a store near you, just take the slide in and they'll help you out. Otherwise, you'll need to surf through their internet site.
I replaced my cheapo metal slides with these hardwood slides from Rockler:
http://www.rockler.com/product.cfm?page=198
Pretty easy project, and made the drawers much stronger and smoother.
|
|
|
