I have a class c with an internal propane tank. What I would like to do is two things. The first is use a 20# tank to provide lp gas to my rig when my internal tank is empty. I am aware of EXTEND A STAY and realize that product is the solution to my first issue. Second, and this seems to be the hard one, I want to supply a large gas grill outside my rig, with gas from my internal tank. My grill has a large plastic female POL, the kind that attaches directly to a 20# bottle. It appears that EAS only has a, so called, high pressure hose connection for small gas appliances, and a relatively short hose. Is there some adapter to join the high pressure, EAS ,hose ending ,to the female POL on the grill? Can I change any of these connections? Will one solution eliminate the other or use of a 20# tank on the grill? Does this impact the regulator on my rig, or the grill? I need to satisfy both issues. Thanks for your help.
The grill needs high pressure with the connector you described, the extend a stay puts gas into the rig on the high pressure side of the rigs regulator so if you can attach you grill at the extend a stays connection it should work. Our rigs on board tank is on the front drivers side along with the regulator and the extend a stays connection, quite a way from where I actually want to cook. So I removed the regulator from the grill and hook it up below the fridge on the low pressure side of our on board LP supply near the passenger side rear tire, works great.
1996 HR Endeavor LE,Cummins 5.9 230hp, Allison 3060,
Front-Yamaha Enduro, Rear-Honda Helix Geeser Cruiser + 2 bikes,
22ft 1977 Cruiser in tow.
1 DW, 2 kids.
2 dogs, 2 cats.
I wasn't thinking this far ahead!
I found it was impossible to find an adapter to do all I wanted.
I ran across this website that has all the connectors to accomplish what I wanted. http://www.bigway.com/CARTgallery198.htm
Offline
