Coast Resorts Open Roads Forum: Dinghy Towing: Tail lights


	Already a member? Login here. If not, Register Today! \| Help

Newest | Active | Popular | RVing FAQ

Forum Rules | Forum Help and Support | Contact

Open Roads Forum > Dinghy Towing > All

Reply to Topic | Subscribe | Print Topic | Post New Topic |

ntar827

Bay Village, Ohio, USA

Senior Member

Joined: 09/02/2003

View Profile

Good Sam RV Club Member

Posted: 05/30/11 04:25pm

Link | Quote | Print | Notify Moderator

I presently use magnetic stop and turn signals on my dingy. I use an adapter that converts the connection on the back of my motorhome (class C) to a four wire that the magnetic lights use.

The lights are mounted on top of the dingy. I would like to add another set of lights lower on the back of the dongy.

My concern is powering the extra set of lights.

If I tap into the wires of the magnetic lights, will the motorhome be able to handle the extra load?

Will all of the lights still be bright?

Thanks

Nick

ronfisherman

SE Michigan

Senior Member

Joined: 06/05/2006

View Profile

Good Sam RV Club Member

Posted: 05/30/11 04:46pm

Link | Quote | Print | Notify Moderator

They will probably work by taping into the existing wiring. You could also use a double output adapter like this Hopkins that can be purchased at Wal-Mart. It will not require tapping into existing wiring.
The five pin connector will work with a 4 pin connector.

2004 Gulf Stream Endura 6340 D/A
TST tire pressure monitor system
Kodiak Chassis Class C Forum

Reply to Topic | Subscribe | Print Topic | Post New Topic |

Open Roads Forum > Dinghy Towing > All

	New posts		No new posts
	Closed, new posts		Closed, no new posts
	Moved, new posts		Moved, no new posts

Adjust text size: