MxDad567

Pittsburgh

New Member

Joined: 02/22/2009

View Profile

Offline
|
I am not getting the water level info to my board inside the RV. I check to see if wires are hooked up and not broken which they are not. How do I find out or check to see if the sending units are working inside the tank?
|
Rob's

Home

Senior Member

Joined: 12/28/2009

View Profile

Offline
|
What make and model# is your board??
Rob
RV Tech
|
aruba5er

Neenah Wisconsin

Senior Member

Joined: 11/09/2007

View Profile


Good Sam RV Club Member
Offline
|
They are probably all right. You may have a soap scum build up on the sensors. Many people suggest Calgon water softner powder. Put some in the tank and add water and drive around I guess. I use Robiec Septic Tank treatment. Put a couple tablespoons in and fill the tank and let it work. You'd be surprized what comes out of the tank. Let it set as long as you can a week if you can.
|
2oldman

Near The Slabs

Senior Member

Joined: 04/15/2001

View Profile

Offline
|
dirty sensor 1
dirty sensor 2
dirty sensor 3
Clean sensors 2010
False black water reading
|
MxDad567

Pittsburgh

New Member

Joined: 02/22/2009

View Profile

Offline
|
Would clorox work?I use it all the time in my asphalt rollers to clean the scum from there water tanks. Just not sure if putting that in the tank is a good idea
|
|
|