96Bounder30E
America is my home!
Moderator
Joined: 11/21/2002
View Profile
Good Sam RV Club Member
 Online
|
RUNDLC,
I think you've already got the Y-pipe there..........which Y-pipe are you missing?
|
RUNDLC
Elk Grove, California
Full Member
Joined: 12/22/2008
View Profile
 Offline
|
I talked to Nick at Thorley, the "Y & J" pipes shown in the picture is for a F350, which has the O2 sensor mounted in the actual Y pipe and it's much shorter. I felt better having the actual y/j pipe that goes with the 214Y-FI4-C set.
I just didn't want to take a chance on something not fitting right when I do get started, plus it's was only 125.00 or so.
BTW I ended up selling that full banks system to a guy in Washington.
Now I get to wait for the big brown truck to show up.
|
96Bounder30E
America is my home!
Moderator
Joined: 11/21/2002
View Profile
Good Sam RV Club Member
Online
|
OK...........I got ya.......did you also get the 3" adapter that is after the Y-pipe that attached to the rest of the exhaust system?
And did you get the Thorley gaskets and bolts?
I have a couple of tips I would be happy to share with you if you are interested?
|
Lt46
Cape Cod, Ma.
Senior Member
Joined: 10/15/2002
View Profile
Offline
|
Good deal, they look great. I'll be interested to hear how the installation goes as SOMEDAY I hope to be installing the same. 
Peter & Dawn
97 Winnebago Adventurer 37RW
96 Prowler 27X SOLD
IAFF L-792
|
Sully2
Cincinnati
Senior Member
Joined: 01/20/2003
View Profile
Good Sam RV Club Member
|
Daveinet wrote:I
On Edit: Based on what JeepFreak stated below, Aero Kroil or PB blaster seems about the best. If you can get at it, use an air impact on its lowest setting and just let it bang away until they come out. Its much more likely to crack it loose banging on it than shear brute force.
"Creepy" Kroil...best thing ever invented for "stuck" nuts and bolts
2000 Country Coach Allure; Cummins ISC 330 HP; 71/2 - 8 MPG regardless
2002 Jeep Liberty
|
|
|
RUNDLC
Elk Grove, California
Full Member
Joined: 12/22/2008
View Profile
Offline
|
96Bounder, I did see all the bolts and gaskets, I do hope the adapter is there also. I will take any advice at all. you can post here or pm me either way.
I was fortunate to find these.
Hey where can I find this Creepy" Kroil stuff??
* This post was
edited 03/04/10 07:59pm by RUNDLC *
|
Lt46
Cape Cod, Ma.
Senior Member
Joined: 10/15/2002
View Profile
Offline
|
Here's what your looking for..
|
RUNDLC
Elk Grove, California
Full Member
Joined: 12/22/2008
View Profile
Offline
|
OK LT46, I thought that might be the missing part. I will re-check over the pics the guy sent me. I talked to him last night and he said he would dbl check for anything missing. I should be able the get that piece at a local muffler shop too.
|
RUNDLC
Elk Grove, California
Full Member
Joined: 12/22/2008
View Profile
Offline
|
Lt46, I finally got the headers home , That part IS missing so looks like I gott wait for Thorley to send me one. I'll order it in a few days. How's your install coming??
|
