othertonka
Stockton, CA
Senior Member
Joined: 11/15/2003
View Profile
Good Sam RV Club Member
|
Clickable for the above link
Controller
Othertonka
2004 Southwind 32VS 8.1 Workhorse chassis
2002 CRV Toad
U. S. Gear Unified brake system
Retired Fire Captain, SFD
|
Wayne Dohnal
Bend, OR.
Senior Member
Joined: 03/09/2003
View Profile
 Offline
|
Both slides I have owned just stall the motor at the end of the travel, the same way that power windows work. I'm not saying every one works this way, but it's sure a lower cost and less failure-prone way to design it. My current slide uses a controller that senses the added motor current when the slide stalls, and cuts off the motor. The previous rig didn't have this, it's just stalled the motor until you let go of the switch. Possibly yours has a mechanical stop that's not doing its job.
* This post was
edited 01/19/10 11:46pm by Wayne Dohnal *
2009 Fleetwood Icon 24A
Honda Fit dinghy with US Gear brake system
LinkPro battery monitor - EU2000i generator
|
wa8yxm
Wherever I happen to park
Senior Member
Joined: 07/04/2006
View Profile
Offline
|
On my power gear slides what shuts it off is removal of my finger from the button
I visited the power gear web site and downloaded the service manual... Look for the thread on sheared slide out bolts, the link is in there, it 404'ed on me but I stripped it down and it worked... Hold on and I'll see if I can find the home page. http://www.powergearus.com/ found it Just follow the links from there to the technical manuals and the slide out service manual
Nothin adds excitment like something that is none of your business
Kenwood TS-2000 housed in a 2005 Damon Intruder 377
|
|
|
