| |
Subject |
Author |
Date Posted |
Forum
|
 |
Eternabond problems

Gents & Ladies;
I have been using Eternabond and Dicor white vinyl (I think), backed
tape for several projects on my rubber roof. The problem I have been dealing with is some spot areas and the tape edges "lifting off the roof", and also the white vinyl backing lifting off the adhesive. Kind of wrinkling, while the adhesive stays down.
It is not leaking, but looks bad. It seems that the edge must be sealed with Dicor lap seal for the tape edge to adhere & stay down properly.
I had the roof washed with a Dicor cleaner, and it seems like that might have started the condition.
I did not have this problem with the aluminum backed Eternabond on
a metal roofed motor home several years ago.
Any thoughts ??
REBGORV
|
REBGORV
|
08/29/11 12:45pm |
Class A Motorhomes
|
 |
RE: Onan Generator Runs only with switch held

I have a 7.5 diesel gen. on my 92 American Eagle "J" DP.
I just had to replace a broken fault breaker for very similar symptoms.
It would start, but not run. Found the button style breaker cracked & broken off. Replaced with a $60.00 part from Onan, and "presto", all is well !!
REBGORV
|
REBGORV
|
08/04/11 01:47pm |
Class A Motorhomes
|
 |
Air Brake System Leak Down

I have a 92 American Eagle 38'J, DP, Cummins/Allison, and Air brakes.
The dash air brake pressure gauge slowly leaks down to below 30 psi,
over a period of 5-7 days. I don't think that is a big problem, but I did not notice it during my first three years of owning the MH.
What is considered normal pressure drop ??
The air bag suspension is not affected, and all four stay at full height for weeks !!! The spring emergency brakes are also OK !
Any thoughts or ideas welcome !!
REBGORV
|
REBGORV
|
07/20/11 07:44pm |
Class A Motorhomes
|
|