2inAlabama
Huntsville, AL
Senior Member
Joined: 01/08/2008
View Profile
 Offline
|
I am considering installing a slideout mechanism in my large storage bay. I would like to make my own custom slide mechanism but have been unable to find the necessary hardware. Anyone ever attempt this project?
Just DH & DW
'02 Allegro Phaeton, 300 hp Cummins, Freightliner
|
Jim Cindy
Northcentral, PA
Senior Member
Joined: 03/24/2009
View Profile
Good Sam RV Club Member
Offline
|
Try here, http://www.mcmaster.com/# Pretty much if they don't have something you can use. it's going to be tough to find. I would reccmmend you try MorRyde for a slide. I put one in the front of our fifth to hold a Yamaha generator. http://www.morryde.com/aftermarket/sliding-trays.html
Good luck.
PBH Portable Beach House
2008 GMC 2500HD Duramax Allison 
2009 Cameo 34CK3
MorRyde IS, Disc Brakes, G614's
PullRite Super Glide Hitch
Propane fueled Yamaha EF 2400is
|
Executive
California/Arizona/South Dakota
Senior Member
Joined: 02/07/2008
View Profile
Offline
|
For the price of JoeyBeds, making one IMHO isn't worth what it would cost for parts. I would simply buy the kit....Dennis
Dennis and Debi
Monaco Executive M-45PBQ Quad Slide
525HP Cummins ISM 6 Spd Allison
Chevy HHR W/ ReadyBrute
Full Timing and Living the Dream 
|
Ivylog
Blairsville, Ga. USA
Senior Member
Joined: 06/30/2004
View Profile
Offline
|
Here is the best way to go as you are not going to find the hardware to make one. With these, you supply the plywood floor and put it together. You will need a really good pop rivet gun to pop the large steel riverts. You can make your own trim kit so you are looking at $300+ for a 90" long that will open from both sides. May qualify for the free shipping.
* This post was
edited 02/07/12 05:55am by Ivylog *
This post is my opinion (free advice). It is not intended to influence anyone's judgment nor do I advocate anyone do what I propose.
04 Monaco Dynasty 42' quad slide
Where am I?
How I tow.
|
|
|
