Daveinet
il
Senior Member
Joined: 10/29/2003
View Profile
 Offline
|
Does it have a solid front axle, or is it independent front suspension? P series is independent, W22 is solid front axle. I think the W18 was more like the P series.
IRV2
|
SledHedEd
mass
New Member
Joined: 02/14/2005
View Profile
Good Sam RV Club Member
Offline
|
It is independent with coil springs just like my old 1990 Holiday. So I would say it's a P32. I just found on OEMY'S website that all 4 calipers are the same part # but I can't confirm this. This is pretty frustrating.
Enjoying what life brings me everyday.
|
harold1946
surprise Az.
Senior Member
Joined: 06/20/2009
View Profile
Offline
|
If the 6th digit in the VIN is a 5 its a P32 series chassis. Many parts stores do not have references for large trucks. Try a Workhorse service center or NAPA truck service center. They should be able to reference using the VIN.
Harold and Linda
2009 CT Coachworks siena 35V
W-22 Workhorse 8.1L
Explorer Sport toad
|
rgatijnet1
Florida
Senior Member
Joined: 06/22/2009
View Profile
Good Sam RV Club Member
|
He should be able to look underneath the coach and read the numbers right on the calipers. These will be raised casting numbers on the main body of the caliper. Might have to wipe off some dirt and use a flashlight but they should be visible.
|
SledHedEd
mass
New Member
Joined: 02/14/2005
View Profile
Good Sam RV Club Member
Offline
|
Good point. I think I will crawl under and look at the casting numbers. The owner is calling today to see if it's covered under a recall but now that we know it's a P32 I don't think so. I think the recall was for W chassis only.
|
|
|
harold1946
surprise Az.
Senior Member
Joined: 06/20/2009
View Profile
Offline
|
The P series is not involved in the recall. The P series OEM calipers are Bendix and the W series are Bosh. There are 5 Workhorse authorized service centers in Mass., any of which should be able to quote part numbers using the VIN. Good luck.
|
SledHedEd
mass
New Member
Joined: 02/14/2005
View Profile
Good Sam RV Club Member
Offline
|
Now I have to figure out if there is only one caliper part # for all 4 corners or not. The parts stores can't confirm this and I haven't had time to call Workhorse.
|
C350amg
Montreal
Full Member
Joined: 04/24/2013
View Profile
Good Sam RV Club Member
Offline
|
If you are running a P series chassis the parts are really easy to get.
These are basically Chevrolet chassis. Any good Chevy truck dealership should have these parts.
I just had the 2 back ones changed and rebuilts at the dealership were 70$ each.
P30's are also notorious for too much end play on the bellcranks.
Triple E Commander Vortec 7400 with Banks system, 187,000km and going strong.
Mercedes C350 sport 2008
BMW R1150RT
|
enblethen
Moses Lake, WA
Senior Member
Joined: 01/05/2005
View Profile
|
Go to Raybestos website. You should be able to compare part numbers.
Raybestos
Bud
USAF Retired
Pace Arrow
2003 Chev Ice Road Tracker
|
SledHedEd
mass
New Member
Joined: 02/14/2005
View Profile
Good Sam RV Club Member
Offline
|
According to OEMY's website the Raybestos caliper # is for all 4 corners. Picked up a couple today and will be putting them on tomorrow. These calipers take the 184 pad so I should be all set.
|
|
|
