tatest
Oklahoma Green Country
Senior Member
Joined: 05/14/2005
View Profile
 Offline
|
You can take the leg and hinge mechanism off, remove the leg from the hinge, and try to bend the hinge back into shape using a vise, locking pliers, metal-working hammer and/or crow bars, whatever it takes. Same for the hinge part on the wall. These are just pieces of non-spring steel, if a rental customer bent the piece out of shape, it can be bent back into shape.
That's if you can figure out just what shape the piece needs to be.
Otherwise, you can buy replacement parts. The table and leg hinges Winnebago uses are fairly common across brands and types and a lot of servicing RV dealers stock the parts because they are often damaged by abuse (e.g. drop a pencil between the hinge and wall, then force the table up to release it). A Winnebago dealer can order the specific part.
Tom Test
Itasca Spirit 29B
2001 Ranger Edge
|
